Recent content by CrossoverOre

the fosgate 4 ch might have high level input. run the 4ch high level and get Scosche LOC90 Speaker to RCA Line Output Converter 2-channel speaker-to-RCA line output converter with remote level control at Crutchfield.com for the sub amp.

a little more detail on the hardware you are playing with would help.

The first question is did you buy the stuff new? The power light not working sounds a little weird. As for the noise you are in for some fun. The first thing I would do is get a headphone to rca plug it into you phone and see if you still have to noise. If you dont then the noise is coming from...

were you messing around with the rca's when the stereo was playing?

automatic silverado's have a ton of space to actually punch your own hole and run through the firewall. enough room for +2" hole. way easier than running under the car plus safer if you like to take your truck off road. do a push pull setup with the fans you will get better circulation that...

I would fire backwards or more vertical. Get that bass bouncing off the back glass. Shouldnt matter too much about the slot port with the angle as long as your not trying to put a slant on the port itself. You could also put another wall at teh end of the port to square it out.

napa auto sell corrosion inhibitor and cleaner

most laymen with ok hearing will hear the difference between that sub and the two amps. just a better quality signal.

no prob

its all that legalized pot. lol

https://www.google.com/?gws_rd=ssl#safe=off&tbm=shop&q=fosgate+prime+250.1&spd=3061494422392231383

in parallel is putting a .5ohm load to the amp and thats the problem. http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_4-ohm_mono.jpg

Chances are you will not find an empty spot in the panel for the new line. vw is too **** for stuff like that. there will be empties but no pins to connect. So you could get something like 10 ATM Mini ATC Car Automotive Fuse Taps Add on Wire Adapters Auto Boat New | eBay. And the reason for this...

never assume stuff especially if you are trying to give someone advice. and a 2ohm speaker getting a 4ohm signal doesnt work that way.

all in all they will "work" together. I would suggest a better quality amp as the shallow mount subs dont output as much. With a better amp the overall sound will be much better than that boss amp. as for fitment, get teh dimensions of the pioneer box and jsut take some cardboard and mock up a...