dragon.breath's latest activity

If you’re just going for the look of bed liner you can use textured spray paint. The advantage of that is their are several colors to choose from...

Unfortunately for you , a very large majority of the people on this forum are in the USA. We don’t have Skoda cars here. I will say that the...

I would go with the ofc. If you use the cca, you should go a size larger. ( If your amplifier requires 0 gauge, use 00 if you go cca. )

14 year old cd player. Broken. Time to upgrade.

If the red wire doesn’t have 12 volts with the key on, the stereo will not come on. If you want to test the stereo to make sure it is working...

Picture 1. Set the upper slider marked HP to about 75 or 80. Picture 2. Leave it the way that it is. Picture 3. The top knob is the bass...

That is a preorder. Which means, who knows when you will actually receive it. It’s your decision, but I swore off pre ordered years ago. I...

Have you checked the battery voltage at the amplifier while it’s playing? Because what you are seeing may just be impedance rise, not low voltage.

What? One thing is a electronic crossover, the other thing is a type of subwoofer enclosure.

My dad had a street rod that he built a few years ago. He hid a regular car antenna inside of the trunk . he mounted it horizontally at the top...

That is incorrect. 80 hz is the starting point of the filter. Not the 12 db down point. In other words, 80hz is the highest frequency that has...

You have set the filters wrong. For example 80hz for the low pass is where the filter starts reducing output, not the 12db point.

I would run a separate amplifier for the subwoofer.

I would not spend huge amounts of time trying to get the measurements down to the millimeter. Just get basic measurements down to an inch or two...

The easiest thing to do is to shorten the wires as much as possible. Or tuck the extra wire down into the seat gap. I only really did a neat...

https://www.cdtaudio.com/cdtnew22/products/components/woofers/cl69subcf.php I have a set of these in my LeSabre. They sound good so far, but I...

Some head units have switchable rca outputs. Meaning that you can go into the settings and change the rear rca output to be a subwoofer output...

I picked up a 2004 lesabre with 61k on it a couple of months back. I couldn’t pass it up for $1200. Threw a new set of tires on it and have been...

RCA is cleaner than high level input. The loudness should technically be the same. ( that is what the gain control on the amplifier is for) I...

Are you wanting more overall loudness or just more highs? If you just want more highs a set of pro audio tweeters might be all that you need. The...

My recommendation from the other thread is even more valid after watching the video. Speakers behind you and mounted that low are never going to...

The headunit can use both rca and the speaker outputs at the same time. The amplifier needs to be one or the other. ( don’t connect both high...

Thread is from 2011. I smell a double goat thread.

You could use a fm modulator to add Bluetooth. It basically goes in line with your antenna wire and injects the signal to the radio in the car...

ACC fuse is the accessory fuse. You can pretty much just use any fuse that turns on and off with the ignition key. The radio fuse is usually my...