Recent content by Metalfan038

Yea thats exactly what i did. 16 ah right before the amp and big 3 upgrade and i now hold 12v 3ven when pushed

I have one installed. I keep around 12v pushing it pretty hard

Im gonna look into getting a new box built with a much bigger port.this ones 6" slams. But i know its being held back by that port. Anyone suggest a builder? I got this one from concept enclosures

Finally got it running with an xs power under the hood and 16 ah lithium. 30hz tuning it slams hard. Happy

Stgus one was suggested? Doez not have a manual setpoint for voltAGE? what should i be looking at then? Reccomendations

Ok cool. I understand the top balancing and then install active balancer. So the charger i use So charge them to 14.4 volts? Thats where my alt charges. So i will need a charger with a setpoint on it? The charger part is confusing me. Im reading different thi gs everywhere. Some people have...

All new to me.thought i needed to initially charge the bank with a plug in type charger before installing in my system. Thats why i am here to learn this stuff. So i can just build the bank and in Its mostly a diy beginner setup if gies well will be expanding to 64ah. Thats why i am here to learn

Thanks for the advice. Why is it not ok to just hook the battery up in parallel with the one under hood now and let the alt charge it? Just curious

Building small headway setup. 16 ah 8 cells. All new to me. Can someone shoot me a link for a cheap but safe lithium charger please. Its confusing when i search i have a regular 12v charger but cannot use that one of course thanks in advance. Or could i possibly use the 12v trickle one i have...

I have 2 runs 1/0 ga from battery under hood going to my extra battery. Im gonna run an isolator when i upgrade to lithium in the next coupke weeks. My question is will i need to run 2 isolators? One on each wire? Or is it possible to just run both wires through the one isolator? Thanks in...

So would either battery be ok with a stock alt 200 amps. And be enough to run my smart 5 at 1 ohm?