Recent content by mobilworksaudio

No you don't have to take the liner down, but you'll want to take off any visors and pillar panels so that it will sage down and give you plenty of access without fighting it. I normally cut the hole big enough for the mounting bracket to fit through the head liner. Figure if your going to...

thats probably the worst unit you could ever attempt to learn on. There are sooo many wires on that thing, and you'll only use probably a third of them. Not to mention programming it will not be fun. Built in shock sensor is super touchy, and difficult to set using the remote. The brain is...

here you go

the only thing that is bad about clipping the output of an amp is that the amp is at full throttle at that point and this is like turning the valve on a garden hose all the way up with the hopes that you'll get more water pressure... I personally don't know of too many components that are...

what kind of car. try unplugging the antenna connector and see if the radio still powers up....does it..?

you've got something unique here.. you have the measurement at the ignition column....on the following wires... constant ignition accessory what about at the back of the radio constant ignition ???

Yeah i think there might be some issues with the way that you are taking your measurments... Are you testing for voltage or current/amps.... what setting is your meter on ? Where and how are your test probes connected. If you have deep cycled your battery a couple of times already then your...

although a kick in the man pills does sound great.....try this instead... http://www.mobileworksaudio.com/shopexd.son?id=934

let me guess you bridged the amp and ran it at 2 ohms...

http://www.mobileworksaudio.com/techsupport.asp if you scroll down you can find disassembly instructions for alot of different cars

http://www.mobileworksaudio.com/shopexd.son?id=1842 I think this is everything your looking for...

http://www.mobileworksaudio.com/guides/mustang01radio.htm This might be of help to those that have that system....

the only bonnies that had amps for that year were bose equipped bonnies.... ok some had non bose factory amps, those amps can be powered up using the extra plug that is all byitself, in that plug there is a pink wire, that pink wire is used for amp turn on and power antenna. Connect that wire...

Not to mention that the stock monsoon speakers in the cameros are dual voice coil. You would have been better off just buying replacement stock speakers from the dealer...and putting those back in.. if your already in the process of rewiring and replacing components and can't go back, then i...

You have to turn the unit off by first holding the source button. Next hold the audio button for approx 3 seconds, then use the up down left right arrows to adjust the time,