Recent content by NFrazier

Just wanted to update everyone we are moving into a new location in West Springfield this week! Running remote start specials all winter long!

Now for those not familiar with this vehicle it uses a MOST fiber optic network to transmit the audio signal through the vehicle. Instead of catching the signal AFTER the factory amplifier, summing the channels, de-equalizing it, etc. etc., we used the DMI to take the MOST signal and convert it...

Client came to us looking for an upgrade from his factory Bose system. Wanted something with a little more volume but more importantly better definition, balance, and overall output quality. After some consultation we decided on product that would work best for him to achieve his goals; he...

Hey everyone, just wanted to share our page and work with everyone. We are located in Springfield and share the location with BG Window Tint (which some of you may know if you live in the area). We do any and everything 12v. We obviously use no t-taps, everything is military spliced and/or...

Pictures of your work? Amount doesn't mean much.

Finally finished it off...for now. Client coming for remote start/alarm next!

Finally I installed an iSimple kit so the client could use his iPod on his factory radio. This gave full control, text, and charging. I also ran the USB from the Bit Ten into the center console for ease of connection (and supplied a USB extension to connect to a laptop). The vehicle was tuned...

Then I moved onto the tweeters. The factory location was good, but need a little better aiming. I used Sonus's products to fabricate the pods to house the HT28 tweeters. Miscellaneous Sound Proofing: Rear Deck Trunk Lid

The client wanted the most space in his trunk. I mounted the HDP5 and Bit Ten underneath the rear deck. We were deleting the rear speakers and factory woofer utilizing the HDP5's fifth channel to power the HX300D (phase 2). The amplifiers were bolted in place so they were secure. All the wires...

Products that are being installed: Mounted the fuse holder to the factory battery bracket. The power wire was loomed and heat shrunk to be as stealth as possible. Next I ran all of the wiring following factory harnesses on each side. The wires were zip-tied approximately every 6"...

trade for a 12" t2 brand new?

In his defense, PA claims it does 1500@1 ohm...he can only work with what he's got. Do I support every shops selection? No. But on the regular you have cheapskates that come in and want "fiteen' hunded watts yo'!" but want to spend $100....You also can't walk into a retail establishment and...

disregard