Recent content by vented

THanks guys!!!!.

hmm.... 15$ Your country is outrageous. I can get 1/0 for 2$ a ft here. crazyness.....

I need a box design, i have 2 Re se-x 12 s . I don't have a computer to use winisd if someone could lend some of their time to shoot me a design. That would Be loud id greatly appreciate it. Id like it to specs. 2Cubes per sub 33 hz slot port. Space is not a problem i have a minivan.

Yes, you will run more efficiently, 2 gua isnt that expensive

well first off, i would run all 2guage, secondly you need to ground to your chassis , not from the battery. That ground is too long. I personally wouldnt use anything longer than about 4ft of ground.

Are your Rca's next to your ground or amp power wire? If so Run your rca's seperate from those, a lot of times this happens. Happened to me and once i ran the rca seperate the noise went away.

First of all, drop the factory batteries alltogether i say, Get a good deep cell and drop another near your amps, if you dont have room then have a good battery under the hood and get the dual alternators. however unless your drawing that much current then it may not even be necessary to even do so.

If your going with one 15, what i have seen done is dual ports , one on each side of the box with the 15 in the middle in sort of a wall.... my buddy did that and got a 142. Ports and sub both facing forward.

There's no real big difference between aero and slot ports other than aero you can interchange them for different tuning, aside from that its mostly asthetics . As for your designing a box, Need the measurments you have to work with in order to effectively help.

It depends, did u dmm the amp to see how manyamps its pulling, if its pulling the max then u prob need both. The thing is if its trying to pull more amps then your alt is capable of its going to be in full charge all the time in which case will burn your alternator up quickly. I would at least...

I had a similar issue, what i ended up having to do is not use the OEM ground at all nor the positive lead, i ran a 12 ga wire directly to the batt and rewired my ac power (the yellow wire) to my fuse panel then my ground to a good spot on the chassis, after that. no issues what so ever

I owned a stang, do u want spl or overall sq+spl. If huge wants sq id do a box with subs facing rear and port down, assuming its been deadened. Or id. do them. Front port facing side. Don't face port to trunk lid it will sound like a rhino fart:fro:

Thanks guys, i found one... hifonics brutus 2500 they are now cea compliant and its 379$

Ok so i know of some great amps, but they all cost well over what i can afford. Im looking for advice on some amps that give good power,rated power. Id like a 2500 watt amp. I have 2 Re se-x 12s and plan on adding 2 more. Im going to get a processor ,big 3 , a redtop underhood and add...

Idk, my re subs are pretty loud with it...i get window and roof flex. If that's the case id love to see it with real power. Speaking of , i was looking at the bd1500 , i know Rockford amps are underrated but is it worth the 500 price tag. Can u give me some that are. Good amps that will put...