Recent content by DanOpi

  1. DanOpi

    Re installing Audio Set Up

    Yes and yes.
  2. DanOpi

    Re installing Audio Set Up

    Still only getting around 9.8 Volts per channel. Tried with a new mmt too. At a loss of what to do
  3. DanOpi

    Re installing Audio Set Up

    Should each speaker be 17.32 Volts or should the total be 17.32?
  4. DanOpi

    Re installing Audio Set Up

    It was up. 80% of the maximum value. 50.
  5. DanOpi

    Re installing Audio Set Up

    Okay I tried again and disconnected the positive and negative right speaker terminals. Played the test tone. Had the correct scaling. Turned the gain all the way up and it only got to 9.8. I need to get to 17.32! What's wrong?
  6. DanOpi

    Re installing Audio Set Up

    What is the correct scaling?
  7. DanOpi

    Re installing Audio Set Up

    I played the tone and set the 2 leads on the negative and positive terminal of a speaker and started playing with the gain. But the voltage wouldn't change. I'm not sure if i'm on the wrong setting or if the leads aren't in the right place or what? Any input? My MMT looks something like this...
  8. DanOpi

    Re installing Audio Set Up

    So 17.32 V? And where can I get that test tone? How can I identify clipping?
  9. DanOpi

    Re installing Audio Set Up

    My amp is 75 x 2. So is that 150 W or 75 W. I think 150. And they are 4 ohm. So my equation would be V = sqr (150 x 4) = 24.49 V? And when setting this I have my volume at 80% of the maximum playing a test tone? What hz? 50 or 60? Have heard of both being used.
  10. DanOpi

    Re installing Audio Set Up

    So i'm still confused on the setting gains. Is that the level knob? What are my P and R values according to the amp? And what do I test with the dmm? edit: and what about frequency and cross over?
  11. DanOpi

    Re installing Audio Set Up

    Thanks. And so even the speaker wire you would use ring terminals?
  12. DanOpi

    Re installing Audio Set Up

    Ignore the boot... Phone uploaded that too for some reason.
  13. DanOpi

    Re installing Audio Set Up

    I had this set up in my old car but I got rid of it and took everything out. It's been around a year or two since I installed it so i'm a little rusty so please bear with me. I laid all the wiring this morning and I just want to clear some things up before I start connecting things and putting...
  14. DanOpi

    Locker Room Set Up

    Hey guys, I was just wondering if someone could point me in the right direction for a locker room audio set up. We don't need anything real nice just something that'll be loud and sound alright. Would we just look to buy a home theater sound system? Thanks in advance! ~DanOpi
  15. DanOpi

    First Setup (Front Stage)

    Hey all, I've been on the forums a while and have been reading and talking to people through out the past few weeks and months. I figured out what set up was best for me and what i wanted to do. I decided on doing a front stage set up and i found someone who was willing to set me up with...
Top