Recent content by Rcn11thacr

Are there any label making machines available that allow you to print directly on your currently owned heat shrink and not from a manufacturer supplied roll? I have a multitude of different sizes and all are specialty heat shrink. We are talking tiny ones to sizes that are 3:1 shrink ratio and...

Well tuning at the level you guys are talking about is over my head at the moment. I built this box with 4 different chamber sizes so I could hear what size chamber sounds good to me in my 94 single cab with a S8L7. I have .66, .70, .74, & .80 and I’ll try each one at a time. Once I get the one...

Using measurements in the picture and adding wood (since this software figures external size), I come up with .66 cu ft air space per sub. I am having issues figuring out what each enclosure is tuned to based on the picture. It says the Qtc must be greater than the Qts. Am I entering it...

Made some progress today. The overall length changed to 62 inches. Still have 4 individual subs in their own boxes. I still do not know what the box is turned to.

I did attempt to use sub box pro and a few others and none of them allowed me to enter the specs, considering the odd shape of the box. I would not have asked for help before using what was available. If these programs will do the odd shape, then it was an operator head space and timing issue...

I am building this box this morning and would appreciate if someone would lend me a hand with figuring out what this box is tuned to and what the exact internal dimensions are? I have 4 S8L7 4 ohm dvc solo baric’s planned for a 94 K1500 single cab and I would appreciate if someone could check...

Hah, maybe I didn’t clarify that. I’m not planning on putting this in a ‘small’ box. My goal is to use the strongest box material possible so I can have shave the overall wall thickness of the box. Fiberglass being much stronger than MDF, etc, I can have more room inside the box for the sub. I...

If you were building a sealed box which was intended to withstand between 23-2700 watts of power, how thick would you make the box? This will be holding a single sub. My understanding from various manufacturers of sub makers, using a sealed box w/ a single 10 inch sub, @1 cu ft, with 600...

Ok. You said comps and the first thing I think is Kicker. Lol

Ah, understood. Hopefully the extra deadener I plan to add to the panel will help with the flex.

I assume your talking about these for the front? https://www.kicker.com/comp-rt-6-75-4-ohm-subwoofer

I have a 2008 GMC Duramax crew cab with a 275 amp alternator that I gutted the interior, top to bottom, & put 100mil Kilmat and Dynopad in. I’ve ran a 1:0 power line, 18ga 9 speedwire conductor from the in dash Sony XAV-601BT, and 12ga leads going to all 4 doors. The last time I did a real...