1990 b2

[dev199505]

An Excide AGM battery might be within your budget??

Thats what this leadacid is 75ah excide Titan, maybe I bout a bad one? Resting voltage was only at 12v?

Sent from my 5054N using Tapatalk

 

[dev199505]

Think it was a bad ground, ran one of my 0gauge to the frame (I guess technically I had 2 on the engine, one on block and one on alt mount, redid my 4guage body ground and looks like voltage drop is gone atleast till amp starts clipping also cleaned up the wiring a little

Sent from my 5054N using Tapatalk

 

[dev199505]

Just ordered some CCA 0GAUGE so well see if it helps

Sent from my 5054N using Tapatalk

 

[The Camry]

Not sure how I feel about that ground just dangling...

Sent from my SGH-T999 using Tapatalk

 

[dev199505]

Not sure how I feel about that ground just dangling...
Sent from my SGH-T999 using Tapatalk

Its not it's ziptied in place

Sent from my 5054N using Tapatalk

 

[The Camry]

Its not it's ziptied in place
Sent from my 5054N using Tapatalk

Still. If it was an amp ground. Id never put it there but as its a big 3 ground. No biggie.

Sent from my SGH-T999 using Tapatalk

 

[dev199505]

Still. If it was an amp ground. Id never put it there but as its a big 3 ground. No biggie.
Sent from my SGH-T999 using Tapatalk

Yeah it's big 3, once I have the inner fender well on it's actually covered, I have it taken off right now cause I gotta replace the exhaust manifold

Sent from my 5054N using Tapatalk

 

[cfox10 10+ year member]

I'm running a single hds208 on a sounqubed 2200 @.5 with an xs d3100, big 3, and it has been handling the power like a champ. Don't know how you slinkied your coil so easily. I just have to be careful not to bottom out the sub.

I'll take a video if anyone is interested.

 

[dev199505]

I'm running a single hds208 on a sounqubed 2200 @.5 with an xs d3100, big 3, and it has been handling the power like a champ. Don't know how you slinkied your coil so easily. I just have to be careful not to bottom out the sub.
I'll take a video if anyone is interested.

I was clipping it real bad didn't have gains set plus it was wired to one ohm when amps only rated at two

Sent from my 5054N using Tapatalk

 

[cfox10 10+ year member]

I was clipping it real bad didn't have gains set plus it was wired to one ohm when amps only rated at two
Sent from my 5054N using Tapatalk

Makes sense. I probably have crazy rise too. The most I've seen ran to one is 1700w clamped. He ran it well into it bottomed out and the former bent. Coil was still shiny lol

 

[dev199505]

Makes sense. I probably have crazy rise too. The most I've seen ran to one is 1700w clamped. He ran it well into it bottomed out and the former bent. Coil was still shiny lol

Oh yeah mine bottomed out hard anything less than 35hz which is what box was tuned to

Sent from my 5054N using Tapatalk

 

[dev199505]

0 gauge should be here tomorrow trying to decide if I should sell what I don't use ore keep it for when I have money to start my battery bank

Sent from my 5054N using Tapatalk