4 12" memphis mojo on 2 memphis 4kw's **PICS and VIDS**

snoopysnooper
10+ year member

german engineering= fail
here is a build log of the shops democar that i work at.

i work at electronics warehouse in saratoga springs NY

this is our show car.

its a 99 civic Si..

16ish cubed enclusure tuned to about 45 hz..

it was originally used for 4 12" diamond d9's powered by 4 diamond d6 1200.1's

now the owner upgraded to 4 12" mojo's and 2mojo 4kw amps

only 1 yllow top is running to ea amp plus a small yellow upfront..

voltage stays at 13ish w/ system on engine off,

and stays at 14.5 normally.. its awesome

the speakers hes using is 2 sets of memphis sq 6.5's

and in coustom kicks are 4" mclass speakers powered off the deck

the spekaers will be powered by a memphis 5004 125x4 at 4 ohms..

the H/U is an alpine iva-w200 touch screen

there is ALOT of work to be done tocar to be finsihed

the enclosure he is just using temperaraly for a month while he is building a new one, but it needs to be more re-enfoced and another layer of resin inside..

it flexes crazy and carcks are forming..

the door panels are being finished and flocked, and the trunk is being finshed and the fiberglass panels are being done (by me, lol)

is sounds TERRIFIC! well, for only 4" co-ax's being hooked up..

the h/u will need to be replaced, the video signal is not getting though, sound comes out but the brain of the h/u is all weird..

here is the buildlog, lots of pics, and a few vids of flex..

the back gutted ready for amp rack:

DSCF2835.jpg


DSCF2836.jpg


the h/u

DSCF2837.jpg


showing the shoips symbol and some of the bracing:

DSCF2839.jpg


DSCF2840.jpg


DSCF2841.jpg


 
the coustom 4" kciks:

DSCF2842.jpg


teh rimz:

DSCF2843.jpg


reppin E dub:

DSCF2844.jpg


teh mojoezzz:

DSCF2941.jpg


DSCF2942.jpg


3 memphis line drivers =D

DSCF2943.jpg


one of the mojo 4k's and the 5004 in ready for amp rack prepping:

DSCF2944.jpg


amp rack 85% done:

DSCF2947.jpg


=]

 
yellow top and battery top:

DSCF2945.jpg


memphis sq 6.5" speakers:

DSCF2948.jpg


the panel i helped do:

DSCF2949.jpg


DSCF2950.jpg


DSCF2951.jpg


so far is sounds incedable.. the 6.5's are going in once we get the door panels back form the other shop that mark owns about 20 mins away, the head insaller there is finishing those..

i coulda taken alot more pics and i wish i had.. i wok again monday, ill take loads more then, most of it should be done by then..

vid up in a bit

 
TEH VIDZZ:

i got 2 more..

read th discription on the vids.. it explains why the flex isnt gigantic!

still breaking em in, this was the first day they seen power..

pass on the deck was on 0

gains was at 1/4..

it was still ungodly loud.. lol..


 
yea man, they sound great.. the guy in the darker red shirt in the vid had 1 10" dual 2 mojo sealed on a mc1100 and i must say sound quite nice it being an spl sub and all..

 
WOW someone else in my area //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Nice install, I may have to stop in there some time.

 
yeah, its the lighting and if because sawdust is all over, when show season comes around it really does look great..

it needs to be re-flocked ne ways..

and the enclosure is actually about 13+ cubes.. it goes all the way down the the wheelwell, and goes to the very back of the trunk.. it really is quite big..

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

  • Locked
Oh, just for future reference. Put $800 OBO, or you will only get that $600, or less. ;)
4
942
https://caraudiobargain.com/audio-apex-cab-22-car-amplifier-monoblock-2200-watts-rms/ Since these are back in stock they're really hard to beat...
5
966
And the most important thing you've learned in life up to this point is to get offended on behalf of other people on the internet in the attempt...
18
4K
So recently I bought a Memphis prx1000.1 and installed it to 2 rockfordfosgate r1s'. Both svc and 150rms 4ohm. I wired them to a 2ohm load to the...
0
2K

About this thread

snoopysnooper

10+ year member
german engineering= fail
Thread starter
snoopysnooper
Joined
Location
Saratoga Springs, NY
Start date
Participants
Who Replied
Replies
32
Views
7,689
Last reply date
Last reply from
snoopysnooper
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top