I've been doing my R&D for the DAD kmh-12 sub but first hand XP is needed in any situation. It's in a ported box so I know the sub won't take as much pwr in this instance but if it is built stronger than what it's rated for would the actual 800rms be worth while for it. I listen to rock/grunge/metal. Any insights would be great Thanks.
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
- Started by RyanJ0022
- General Car Audio
- Locked
COMPLETED
WTB - Small Mono Amp WxDxH
NVX MVPA1
Best tiny amp
Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater
Can bump it all day long and barely gets...
- Started by AnthonyO
- Car Audio Wanted
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
- Started by saints747
- General Car Audio
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
- Started by kanihoncho
- Wiring, Electrical & Installation
About this thread
New threads
-
-
What type and placement of box for dual 8 or 10" shallow depth subs for 2011 Hyundai Veracruz?
- Started by kanihoncho
- Replies: 0
-
-
-