joem1cha3l 10+ year member
Senior VIP Member
Any suggestions? Purchased Hertz ESK 6.5's for the front and DSK 6.5's for the rear. Both components.
Im running the front at 120 HZ with -18db/slope
Im running the rear at 100 HZ with -18db slope
Subwoofer is being run at 80 Hz, but that sounds fine.
Amp is Infinity Kappa K4. I turned everything down to 0, turned HU up to 3/4 volume and tuned from there.
I just am not getting crisp sound. Wiring from HU to door is stock.
Wiring for amp is high end, good stuff.
Wiring for components is a random, cheap 16 gauge.
Any thoughts in particular? Running them in a 2016 Tundra. Head Unit is a Kenwood DDX374BT
HELP PLEASE BEFORE I TOSS THESE THINGS
Im not getting clean, crisp sound at all. Particularly in the mid range. Bass (whatever is left w those crossover levels) sounds like crap!
Im running the front at 120 HZ with -18db/slope
Im running the rear at 100 HZ with -18db slope
Subwoofer is being run at 80 Hz, but that sounds fine.
Amp is Infinity Kappa K4. I turned everything down to 0, turned HU up to 3/4 volume and tuned from there.
I just am not getting crisp sound. Wiring from HU to door is stock.
Wiring for amp is high end, good stuff.
Wiring for components is a random, cheap 16 gauge.
Any thoughts in particular? Running them in a 2016 Tundra. Head Unit is a Kenwood DDX374BT
HELP PLEASE BEFORE I TOSS THESE THINGS
Im not getting clean, crisp sound at all. Particularly in the mid range. Bass (whatever is left w those crossover levels) sounds like crap!