Buck Box Designs - Refreshed Thread

[SlugButter]

what size and type of port did you run on this?

I ran it in 1 cube tuned to 30 hz with a 4 inch round port.

 

[Buck 5,000+ posts]

I may be getting a temporary cable setup, so I can start design earlier. It's been driving me nuts to not be able to design. I'm on my laptop now, but it's 11 years old and has a tiny screen. I've had to order a very long video signal cable for me to hook up my 27" 1440p monitor back up to my very high performance PC. My designs have advanced so much that this laptop suffers serious lag after a certain amount of lines drawn in the 3d software. It's painful to design on this laptop, lol. I had to mount my big PC on a wall, and I had no idea what I needed for that, until I actually had it mounted and could see the total situation.

So, I apologize for any long waiting times for those needing designs. There's just not much I can do with it. I guess you could call it growing pains, lol.

 

[nags 10+ year member]

I ran it in 1 cube tuned to 30 hz with a 4 inch round port.
View attachment 32146

Love that sub

 

[Buck 5,000+ posts]

Got my PC back up and running. Should be back designing tomorrow, finally.

 

[Buck 5,000+ posts]

 

[Jroo 10+ year member]

what size and type of port did you run on this?

you ran a 4inch port on the bandpass as well?

 

[Buck 5,000+ posts]

3 SSA F8L's ported in a center console box for a quad cab

 

[Buck 5,000+ posts]

Another center console box

Sundown NSv5 10" Ported - this sub may have the biggest mounting depth for a 10. The NSv4 10 is 11.25; I think the mounting depth is close to that, if not the same. D4S told me that the sub mounting depth was about 12 inches. So, I made sure to leave plenty of depth for this sub that has a bigger mounting depth than it's cone diameter...lol

 

[Buck 5,000+ posts]

Working on a wall for 5 American Bass Hawk 12's

 

[Ridinhi 5,000+ posts]

Another center console box

Sundown NSv5 10" Ported - this sub may have the biggest mounting depth for a 10. The NSv4 10 is 11.25; I think the mounting depth is close to that, if not the same. D4S told me that the sub mounting depth was about 12 inches. So, I made sure to leave plenty of depth for this sub that has a bigger mounting depth than it's cone diameter...lol

View attachment 32324

View attachment 32325

View attachment 32326

View attachment 32327

Do you know if this person will face the port rear or foward?

 

[Buck 5,000+ posts]

Do you know if this person will face the port rear or foward?

They could do either, but rear is the plan.

 

[Buck 5,000+ posts]

There's better loading here with the port firing rear.

 

[Ridinhi 5,000+ posts]

There's better loading here with the port firing rear.

I may actually need you to design me something like this soon.

 

[Buck 5,000+ posts]

I may actually need you to design me something like this soon.

If you have enough space, we could do a bandpass

 

[Buck 5,000+ posts]

The F8L's only need .55 cubes, and they have a Fs of ~32 hz, and a RMS of 650, and that's impressive. You could do like a 2.5-3 cube series 6th for two of those, and it'd be sick.