fasfocus00's summer build

  • 2
    Participant count
  • Participant list

fasfocus00
5,000+ posts

doITdaWHITEwayORdoITtwice
it's finally time to start my car. it's been a long time waiting. been over 2 years since it's had a sound system. hopefully this is the last time i do an install in this car as I just want it to be my weekend warrior. the system is going to be simple. after sound is done the motor is next. this build will probably last till the end of summer or later (hopefully it gets done before). all the work will be done by me on free time over the weekend.

System Equipment:

Head Unit: JVC KD-X50BT ($106 shipped from Sonic Eletronics)

Crossover: Audiocontrol 6XS ($150 shipped from ca.com member)

Hi's Amp: Hifonics Titan Txi6408 ($150 shipped from eBay)

Sub Amp: Hifonics Titan Txi1508 ($180 shipped from eBay)

Tweeters: Cadence ZRS 40T ($45 shipped from Audiosavings)

Mid ranges: Cadence CVL64MBX ($170 shipped from Audiosavings)

Sub: TC-9 Motor w/12" Basket ($60 shipped from CACO member)

PSI Drop In Recone Kit ($165 shipped from PSI)

Wiring: Install Bay 0 and 4 gauge power, American Bass 16 and 12 gauge speaker wire (most bought in bulk roughly $400 for all spool, gonna have lots of left overs)

Accessories: Autometer Cobalt Volt Meter 6191 ($111 shipped from eBay)

Car is a 2000 Ford Focus ZX3

CIMG0078-2.jpg


TC-9 Sub w/ PSI recone, will be going in a 2.1 cubic foot box tuned to 34hz with a 4" Aero port. box will be a quarter round shape and sub and port will be flush mounted.

22b0abd1.jpg


134aed8e.jpg


Install Bay 0 gauge wire

bf02a494.jpg


8d26ca30.jpg


 

---------- Post added at 09:17 AM ---------- Previous post was at 09:17 AM ----------

 

Cadence CVL64MBX Mid Ranges:

c2f2320b.jpg


929e9fbd.jpg


309c7f39.jpg


Cadence ZRS 40T Tweeters:

339c7c04.jpg


 
JVC KD-X50BT Head Unit:

8ac05c79.jpg


Door Bezel where tweeters will be mounted. Hole drilled with hold saw and trimmed to house tweeter mounting. used Loctite Slow Setting super glue. still needs to be blended and painted, hopefully to get done this weekend.

77e45683.jpg


Autometer Volt Meter, yet to be mounted. it will be mounted in Dash bezel next to head unit where the factory ash tray was.

9e294a6c.jpg


please stay posted as the fun (glass) has yet to begin.

 
Wow, pretty beefy mid range. Curious as to how you're integrating them.
Also, what makes that volt meter so expensive?
just a 2 speaker pod in the door, nothing special. the volt meter is a 360 degree full sweep meter. most of the ones you'll see that are like this only have a 90 degree sweep or 270 degree sweep plus it lights up a pretty blue.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
985
https://www.youtube.com/@therealmatty_s/videos
0
522
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
893
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
961

About this thread

fasfocus00

5,000+ posts
doITdaWHITEwayORdoITtwice
Thread starter
fasfocus00
Joined
Location
New Orleans, LA
Start date
Participants
Who Replied
Replies
3
Views
2,954
Last reply date
Last reply from
fasfocus00
20240519_201344.jpg

audiobaun

    May 19, 2024
  • 0
  • 0
Screenshot_20240519-213549.png

1aespinoza

    May 19, 2024
  • 0
  • 0

New threads

Top