how to recone a subwoofer what you need to know video.

[loudmofo 5,000+ posts]

Click to read more...

 

[snoopdan 5,000+ posts]

I only wish we had a video section

 

[pro-rabbit 5,000+ posts]

That does not even cover half of what someone would need to know in order to recone a sub lol.

 

[SPLaudio 5,000+ posts]

few things i see

cut the surrond then cut the spiders take the ring out last alot easier to get to.

use clear box tape to clean the gap around the pole and top plate. using the q tip first will push chips if present futher into the gap or worse under the top plate and they will reapear in the gap later making it rub/scratch.

dont apply the glue to the spider like that apply to the basket thick and heavy. if there is no ring also apply alot to the top of the spider so it soaks the spider/spider pack good.

there was no showing of aligning the kit to line up for direct leads on basket,shiming the coil or gluing the surrond to the basket oh and dust cap.

it was ment well im sure. also hope ya didnt use ca glue for the dustcap or surrond thats a no no....

 

[splwj47 10+ year member]

few things i see
cut the surrond then cut the spiders take the ring out last alot easier to get to.

use clear box tape to clean the gap around the pole and top plate. using the q tip first will push chips if present futher into the gap or worse under the top plate and they will reapear in the gap later making it rub/scratch.

dont apply the glue to the spider like that apply to the basket thick and heavy. if there is no ring also apply alot to the top of the spider so it soaks the spider/spider pack good.

there was no showing of aligning the kit to line up for direct leads on basket,shiming the coil or gluing the surrond to the basket oh and dust cap.

it was ment well im sure. also hope ya didnt use ca glue for the dustcap or surrond thats a no no....

you should make a vid on how to do it the right way.

 

[dwpjr 10+ year member]

you should make a vid on how to do it the right way.

^^^ x 2

 

[skylineTT 10+ year member]

might hurt business

 

[SPLaudio 5,000+ posts]

^ wouldnt hurt a bit sence drop in's are ez no skillz needed there. the hard part is in the set up and custom work //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif