• 3
    Participant count
  • Participant list

Owen prce

CarAudio.com Newbie
1
0
Helloooooo

Just to be clear i literally know nothing about car audio installations and i need help so i came here.

I have a renault clio hatchback 2007 and i am wishing to install the skar audio spx-65c component system to the vehicle

i dont want it to be runnning very loud, so i would like to stick to the stock amplifier if that is possible with the components i have brought (but only if it would work). Also how would i go about wiring up the external crossovers to the items that come stock in the car?

and finally...

what will i have to change / buy (besides from the mountings in the door) to make all the of this work?

any help is greatly appreciated 

 
Helloooooo

Just to be clear i literally know nothing about car audio installations and i need help so i came here.

I have a renault clio hatchback 2007 and i am wishing to install the skar audio spx-65c component system to the vehicle

i dont want it to be runnning very loud, so i would like to stick to the stock amplifier if that is possible with the components i have brought (but only if it would work). Also how would i go about wiring up the external crossovers to the items that come stock in the car?

and finally...

what will i have to change / buy (besides from the mountings in the door) to make all the of this work?

any help is greatly appreciated 
You would be better off using the amp that comes with everything. Stock amp isn’t too good, using the amp that you bought will help your sound system run better. And since you don’t want to run too loud in sound, after installing everything just tune your EQ and LPF and that stuff, go into the settings of your head unit and mess around with the settings and figure out what sounds best to you. Best of luck! 

 
You will also need to purchase amplifier installation kit or something. This is what I bought, it comes with everything you need. 

F3641E60-38E6-4F65-9589-CF482364A922.jpeg

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yeah, these are listed as 3ohms nominal and that is why you see the 2.7ohm rating (where they can drop to). There are a number of things wrong...
4
915
Yeah, I plan to run them in my workshop. I haven't gone through them or anything but they startup and run just fine. I don't see any strange spike...
8
2K
How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
107
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
2
94
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
432

About this thread

Owen prce

CarAudio.com Newbie
Thread starter
Owen prce
Joined
Location
Start date
Participants
Who Replied
Replies
3
Views
1,657
Last reply date
Last reply from
Popwarhomie
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top