Is all this wiring correct, pic inside

  • 4
    Participant count
  • Participant list

chase008
10+ year member

Member
53
0
HOUSE
Is this correct, O yeah btw I forgot to put the Chasisi to Eng Block, Its not on the picture but I did it already.

SubPicture.jpg


 
did you put a fuse in between the alt and the front battery and i would add a couple more like from the rear to the front and from the rear battery to the amps or on each amp separately like 100amp to the sub amp and then probably like 80 to the front . and how are you like int agm bat im thinking about getting one but i didn't know if they weer any good or not

 
did you put a fuse in between the alt and the front battery and i would add a couple more like from the rear to the front and from the rear battery to the amps or on each amp separately like 100amp to the sub amp and then probably like 80 to the front . and how are you like int agm bat im thinking about getting one but i didn't know if they weer any good or not
I don't need to fuse my alt to battery its only like 5 inches. Same with the battery to amps its only like 4 inches...and my agm battery blows hardcore even with all my subs and amp out of my car my overhead light dims, The battery is a 05 so its prob time to toss it, i'm gonna put a kinetik 600 in the front or a 800... I just like the agm cuz the one I have now is really really good for the cold temps like -20..

 
you should still fuse in between the amps and the battery cause if say your battery shorts out it could blow the amps . rather be safe and put in a fuse that you don't think you need rather them blow an amp

 
you should still fuse in between the amps and the battery cause if say your battery shorts out it could blow the amps . rather be safe and put in a fuse that you don't think you need rather them blow an amp
I ran a system for 2 years with no fuse, lol. Plus I don't want to spend 30$ for a 1/0 fuse right now I prob will in abit but I just took 2 months off work cuz my dad has prostade cancer so money is kinda tite for me

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Do you not have a harness that is plug and play with the OEM wiring? Meaning you buy an aftermarket wire harness, splice the small harness with...
1
21
Ive doubled up 12 ga many times for sub wiring.. even 14 ga for speaker wiring. Its OFC and it should do great and save you some money since you...
7
438
My brain hurts just looking at those diagrams. It's late so if anyone sees a problem with either of those, please feel free to chime in!
8
499
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
554
Yup , the dsp should have input sections, it may have one for sub? Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
2
493

About this thread

chase008

10+ year member
Member
Thread starter
chase008
Joined
Location
HOUSE
Start date
Participants
Who Replied
Replies
6
Views
746
Last reply date
Last reply from
loopkiller
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top