Is this SPL box plan okay?

[Basshead808 10+ year member]

Going in a 98-2004 Camaro.. Running an Orion 1200d and a 12" Resonant Engineering SX:

http://subwoofertools.com/forum/ported-box.asp?Ew=29.5&Eh=14&Dia=6&Xmax=22&Vd=.16&NumW=1&Vb=3.5&Fb=40&Qts=&Vas=&Fs=&CE=0

Click to read more...

 

[CRXBMPN 5,000+ posts]

i think you should cut back a bit on the box size and port width, they go hand in hand if you dont change the length... and i'd cut length too, seeing how its a hatch and its probably going to peak in the 50's or higher...

 

[iagrdshaka 5,000+ posts]

I would make the box a little smaller, especially if its a burp box

 

[Basshead808 10+ year member]

disregard this post..

 

[Basshead808 10+ year member]

How about this one?

http://subwoofertools.com/forum/ported-box.asp?Ew=30.5&Eh=14.25&Dia=6&Xmax=22&Vd=.16&NumW=1&Vb=2&Fb=40&Qts=&Vas=&Fs=&CE=0

 

[Basshead808 10+ year member]

mission complete thanks alot!

 

[PSturmer 10+ year member]

you should not put a turn in it if its a burp box. aeros are a good thing to use because you can easily change tuning.

 

[mlstrass 5,000+ posts]

seems like a lot of port area. You can change the xmax number to change the port area...

 

[PSturmer 10+ year member]

seems like a lot of port area. You can change the xmax number to change the port area...

you want port area

 

[Lakota 5,000+ posts]

I'd do 1.5-2 cubes with 2 4" or 1 6" aero.

 

[PSturmer 10+ year member]

I'd do 1.5-2 cubes with 2 4" or 1 6" aero.

x2

more power would help also.

 

[80INCHES 5,000+ posts]

I'd do 1.5-2 cubes with 2 4" or 1 6" aero.

agreed

2 cubes with 2 4inch or 1 6 inch aeroport tuned to 45hz will make a good spl box

80