Just Came back from the race track..

[bossman032 10+ year member]

http://img404.imageshack.us/my.php?image=mem20purchas20001gi4.jpg

anyways this is an integra 95 @ 2750lbs with driver. Full weight, minus spare tire and jack. Street tires 185/65/R14S

14.0@91.7mph.

before anyone says anything about the trap, I forgot to shift to 5th gear (I held it in 4th)//content.invisioncic.com/y282845/emoticons/suicide.gif.a649d21efc0d1fd4890a6428166586c1.gif or else I probably would have broke into high 13s..

Click to read more...

 

[bbka 10+ year member]

What motor/tranny? Anything done to it? More specs man.

 

[bossman032 10+ year member]

What motor/tranny? Anything done to it? More specs man.

stock k24a2, kpro, header, intake, 3" exhaust, type S 6sp tranny.

thats about it sorry about leaving that out..//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

http://img99.imageshack.us/img99/8305/resave01uj6.jpg

http://server6.theimagehosting.com/image.php?img=IMG_0563.c68.JPG

some pictures!

 

[bigbirney420 10+ year member]

Pretty good time, now it just needs some boost

 

[Skip01 5,000+ posts]

Mann thats pretty good driving i dont see any where you could really improve....maybe try shifting earlier and get some drag radials...good luck

 

[bbka 10+ year member]

I agree drag radials (or slicks) and boost! Haha I bet you wish you had that motor in a 2,000 pound hatch don't ya. You defintely have a good platform to start building on, ever think about slapping a K20 head on there? You can get about 275whp out of a K24/K20 all motor setup and still keep it on pump gas, here's a good example... http://forums.evans-tuning.com/viewtopic.php?t=3925

I'd just go with the boost though... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Skip01 5,000+ posts]

I agree drag radials (or slicks) and boost! Haha I bet you wish you had that motor in a 2,000 pound hatch don't ya. You defintely have a good platform to start building on, ever think about slapping a K20 head on there? You can get about 275whp out of a K24/K20 all motor setup and still keep it on pump gas, here's a good example... http://forums.evans-tuning.com/viewtopic.php?t=3925
I'd just go with the boost though... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

He already has pretty much the same head k24a2 is a TSX...im sure there may be a few hp in there to gain but id rather nitrous it or like you said boost.....either way get some better tires or itll be worthless to add more hp:naughty:

 

[ighettoboyi 10+ year member]

i get so jealous of light cars. i couldn't hit an E.T. of 14 flat w/o trapping nearly triple digits...

 

[Eugenics 5,000+ posts]

I agree drag radials (or slicks) and boost! Haha I bet you wish you had that motor in a 2,000 pound hatch don't ya. You defintely have a good platform to start building on, ever think about slapping a K20 head on there? You can get about 275whp out of a K24/K20 all motor setup and still keep it on pump gas, here's a good example... http://forums.evans-tuning.com/viewtopic.php?t=3925
I'd just go with the boost though... //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

why would he run drags? that would give him no idea what his car is doing on the street you fucktard.

and torque ftw

 

[anaheim drew 10+ year member]

i get so jealous of light cars. i couldn't hit an E.T. of 14 flat w/o trapping nearly triple digits...

What do you drive and weigh?

 

[jdawg 5,000+ posts]

nice time, dont you think 3" on a pretty stock 4cyl is a little much though? Losing backpressure?

 

[Eugenics 5,000+ posts]

it is

 

[Skip01 5,000+ posts]

why would he run drags? that would give him no idea what his car is doing on the street you fucktard.
and torque ftw

where did it say in his original post that he wanted to see what it does on the street?

It has plenty enough tq for a 2700lb car JR:graduate:

 

[Eugenics 5,000+ posts]

where did it say in his original post that he wanted to see what it does on the street?
It has plenty enough tq for a 2700lb car JR:graduate:

I'm assuming that if all he cared about was track times he would've spared himself time and money and just used a lesser setup and slicks.... or used slicks with his current setup.

And i'm referring to his setup versus the k20a dipshit

context > you //content.invisioncic.com/y282845/emoticons/graduate.gif.d982460be9f153bb54e5d4cb744f6ae8.gif

 

[bossman032 10+ year member]

Right now, I am running 14" dukies street tires. The tire on that picture that is on the front is on the back. I have a bigger brake setup on the rear and the Donuts didn't fit. I don't want to run slicks or drag rad, because of the fact this is a street car and I have no money to purchase. My goal is mid 13s! With a VTC upgrade this is goal that I can archive. I am sure my times would have been better If I had shifted into 5th.. anyways thanks for the feedback guys!!