Lucky i seen this? Fz3800 internals..

[OKAY]

When i slid the side opened i noticed one of my rca input looked like this..

By a hair.

Sent from my LG-H631 using Tapatalk

Click to read more...

 

[wew lad 5,000+ posts]

?

ok

 

[rc10mike 10+ year member]

What am I supposed to be judging here? The neg pin screwed in under the retainer nut?

 

[Papermaker85 5,000+ posts]

ouch is it a good connection? hehe

 

[Boomin_tahoe 5,000+ posts]

Rust?

I don't get it...

 

[Papermaker85 5,000+ posts]

Rca is basically a speaker wire, if they touch it could short etc. Look real close..

 

[Boomin_tahoe 5,000+ posts]

Gonna take a guess here...that small wire touching what looks like the nylon washer...

Think I got it now. It should be inside that end of the threaded nut, not soutside.

 

[OKAY]

Ma'bad everyone i forgot to subscribe using tapatalk..didnt get any alerts when you guys replied.

Heres another view...the neg rca was super close really close by like a hair almost touching the pos.

Well after i made this thread i noticed the rca inputs were sorta loose and if it turned it coulda caused it to bend.

I just bent it back and tightened up.

And..

the FSD FZ3800D guts..

Sent from my LG-H631 using Tapatalk

 

[adulbrich 5,000+ posts]

Can't see shit in the pictures

 

[Boomin_tahoe 5,000+ posts]

I see amp guts, not s h i t

 

[OKAY]

alright i wanna play hangman.

Sent from my LG-H631 using Tapatalk

 

[Popwarhomie 5,000+ posts]

WTF I can't see anything with that big *** green mark on the screen. Think you got a booger on the camera lens.

 

[Boomin_tahoe 5,000+ posts]

I can see it fine...these guys are being dumb.

 

[OKAY]

Okay i have another picture i just took 1 minute ago..dmm leads are still connected as in the picture..

I foamed my van took everything out thats when i decided to open the amp up just because. Then i noticed the bent neg. on that rca input...so i put it back together after bending that site back to normal, put all together, box back in the van, amp in, then i connect the neg. input wire then the remote wire..

And because the speaker outputs on the amp are so close together i grab the dmm and check for continuity to make sure no stray wires...because their taped seperately but still im paranoid of it...the dmm beeps once whatever that means?

Then i touch the leads like in the pic and its steady beeping. Then i test voltage..

WHY do i have voltage and the power wire isnt even in the amp yet??

Sent from my LG-H631 using Tapatalk

 

[OKAY]

Wait...a...minute...

The caps, right?

Sent from my LG-H631 using Tapatalk