Need a bad DB Drive PLT15WD D2

  • 1
    Participant count
  • Participant list

manyhobbies
10+ year member

Senior VIP Member
Does anyone have a bad DB Drive PLT15WD D2 sub laying around that I could use for measuring to get recones made? Seriously I would rather not have to rip 1 of mine apart unless 1 takes a complete dump. I rarely ask for help, but if someone can help please speak up. I really don't wanna have to buy 1 but may work with someone to have the ability to get the measurments I will need to send to PSI for the recones.

I will give or receive a number in a PM if you can help.

Thanks, Russ.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I also just checked the voltage and the voltage on the amp in 12.85 and the rest of my stuff like my lc2i and remote out wire is 12.10. could that...
6
79
How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
181
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
2
135
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
481

About this thread

manyhobbies

10+ year member
Senior VIP Member
Thread starter
manyhobbies
Joined
Location
Celina, Ohio
Start date
Participants
Who Replied
Replies
0
Views
299
Last reply date
Last reply from
manyhobbies
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top