morespl 10+ year member
trying to upgrade
Item(s) for Sale:
polk carbon series c300.2
Item(s) Description/Condition:
8/10 missing wire cap
C300.2 Specifications
Power Output: RMS Continuous Power
(at 14.4V at the input terminals, 20Hz - 20kHz)
Per Channel into 4 Ohms (0.1% THD+N) 150W
Per Channel into 2 Ohms (1% THD+N) 220W
Bridged into 4 Ohms (1% THD+N) 550W
Total Dynamic Power 850W
Frequency Response (-3dB Points)
Signal-to-Noise (Referenced to rated power) >105dBA
Channel Crosstalk (at 1kHz) >55dB
Input Sensitivity 200mV to 8.0V
Remote Gain Control 0 to -30dB
Input Impedance >10k Ohms
Speaker Impedance >2 Ohms Stereo
>4 Ohms Bridged
Power Requirement 10V to 16V DC Negative Ground
Crossover Filters
Filter Function High Pass, Low Pass, Off
Slope 18dB/Octave
Frequency (-3db Points) 50Hz to 250Hz
Subsonic Filter 24dB/Octave at 15Hz
Pre-EQ
LP Center Frequency 40Hz
Bandwidth 1/3 Octave
Gain +9dB
HP Corner Frequency 10.1kHz
Slope 12dB/Octave
Gain +10dB
Dimensions (L x W x H)
Inches 13.38 x 9.75 x 2.5
Centimeters 34 x 24.8 x 6.35
F
Price:
125 plus shipping oo
Shipping and Miscellaneous Item Information:
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
polk carbon series c300.2
Item(s) Description/Condition:
8/10 missing wire cap
C300.2 Specifications
Power Output: RMS Continuous Power
(at 14.4V at the input terminals, 20Hz - 20kHz)
Per Channel into 4 Ohms (0.1% THD+N) 150W
Per Channel into 2 Ohms (1% THD+N) 220W
Bridged into 4 Ohms (1% THD+N) 550W
Total Dynamic Power 850W
Frequency Response (-3dB Points)
Signal-to-Noise (Referenced to rated power) >105dBA
Channel Crosstalk (at 1kHz) >55dB
Input Sensitivity 200mV to 8.0V
Remote Gain Control 0 to -30dB
Input Impedance >10k Ohms
Speaker Impedance >2 Ohms Stereo
>4 Ohms Bridged
Power Requirement 10V to 16V DC Negative Ground
Crossover Filters
Filter Function High Pass, Low Pass, Off
Slope 18dB/Octave
Frequency (-3db Points) 50Hz to 250Hz
Subsonic Filter 24dB/Octave at 15Hz
Pre-EQ
LP Center Frequency 40Hz
Bandwidth 1/3 Octave
Gain +9dB
HP Corner Frequency 10.1kHz
Slope 12dB/Octave
Gain +10dB
Dimensions (L x W x H)
Inches 13.38 x 9.75 x 2.5
Centimeters 34 x 24.8 x 6.35
F
Price:
125 plus shipping oo
Shipping and Miscellaneous Item Information:
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
