Power to LC2i but no power to amp.

[Nugg32 10+ year member]

I have the remote wire from the amp connected to the remout IN on my LC2i however I get power to the LC2i but not the amp. I accidently had a few strands of wire hit the 12v port on the LC2i and it powered the amp but obviously that would drain my battery. Any clues as to why my amp doesn't have power off the correct remote connection?

Click to read more...

 

[Firewalker]

Should be remote in from the head unit or a source that is switchable and then from the remote out to the amplifier.

 

[1aespinoza 10+ year member]

Any clues as to why my amp doesn't have power off the correct remote connection?

Disconnect the remote in from the amp and bridge a jumper from the positive bolt, see if amp powers up.

 

[Nugg32 10+ year member]

Disconnect the remote in from the amp and bridge a jumper from the positive bolt, see if amp powers u

Should be remote in from the head unit or a source that is switchable and then from the remote out to the amplifier.

Should be remote in from the head unit or a source that is switchable and then from the remote out to the amplifier.

Yeah, I'm an idiot lmao. thanks

 

[Nugg32 10+ year member]

SOLVED