bentz69 10+ year member
Junior Member
Right now I have one 15" rockford hx2 sub
in a 2.5 foot sealed box running off a
rockford p5002 at 500watts rms @ 4 ohms
bridged. Ive had this sub since 2001 and it
still hits like the first day I bought it. Im trying to save some weight and space.
This box/sub weighs at least 60 pounds right
now and sits in the passenger side of the
trunk. My battery is on the driver side and
there will soon be a 5 gallon meth tank on
the passenger side. That leaves the sub to basically sit in the middle of the trunk or I
could move the amp to one side and place a
smaller sub next to it. Id like to shed some weight and space with
a 12" or even 10" sub as long as it will hit as
hard as the setup I have now. I normally
dont listen to music louder then volume 10
but this current sub hits hard at low volumes
without sacrificing sq which is what I like If possible, I would like to make this swap as
simple as can be. In other words, can you
guys recommend me a sub with the proper
sized box that will handle 500 watts rms @ 4
ohms no problem but be a smaller and
possibly lighter then what I have now so I can just swap them with each other?
in a 2.5 foot sealed box running off a
rockford p5002 at 500watts rms @ 4 ohms
bridged. Ive had this sub since 2001 and it
still hits like the first day I bought it. Im trying to save some weight and space.
This box/sub weighs at least 60 pounds right
now and sits in the passenger side of the
trunk. My battery is on the driver side and
there will soon be a 5 gallon meth tank on
the passenger side. That leaves the sub to basically sit in the middle of the trunk or I
could move the amp to one side and place a
smaller sub next to it. Id like to shed some weight and space with
a 12" or even 10" sub as long as it will hit as
hard as the setup I have now. I normally
dont listen to music louder then volume 10
but this current sub hits hard at low volumes
without sacrificing sq which is what I like If possible, I would like to make this swap as
simple as can be. In other words, can you
guys recommend me a sub with the proper
sized box that will handle 500 watts rms @ 4
ohms no problem but be a smaller and
possibly lighter then what I have now so I can just swap them with each other?