brad 10+ year member
Senior VIP Member
- Thread Starter
- #16
On the bypass there is a wire labeled "Negative ground output when running (remote start installations only)", I currently have this connected to the "white/blue remote start (-) activation input"; which I believe is the correct wire.
There is also another set of wires that plug into the relay satellite for the starter, but they are never mentioned in the manual.
They are labled:
BLUE (-) status output
ORANGE (-) 200mA second accessory output
PURPLE (-) 200mA starter output
PINK (-) 200mA ignition output
Would any of these wires have anything to do with the car not starting, they are in one of these 4-pin mini connectors and aren't even mentioned in the manual except on the reference guide with the wire maps.
The bypass is working as far as I can tell, because it is allowing the doors to lock/unlock and the car is attempting to start so I may try to have the bypass relearn the r-code for the key again.
There is also another set of wires that plug into the relay satellite for the starter, but they are never mentioned in the manual.
They are labled:
BLUE (-) status output
ORANGE (-) 200mA second accessory output
PURPLE (-) 200mA starter output
PINK (-) 200mA ignition output
Would any of these wires have anything to do with the car not starting, they are in one of these 4-pin mini connectors and aren't even mentioned in the manual except on the reference guide with the wire maps.
The bypass is working as far as I can tell, because it is allowing the doors to lock/unlock and the car is attempting to start so I may try to have the bypass relearn the r-code for the key again.