SPlAudio Built Memphis Mojo 12" and ported box - Handles 2500rms!

tpmeredith
10+ year member

Senior VIP Member
Item(s) for Sale:/

PSL Audio Built Memphis Mojo 12"- Handles 2500rms daily

Ported box built by pro-rabbit, I believe tuned to 33hz

Item(s) Description/Condition:

Bought the mojo used I think 2 years ago, got it rebuilt by cory ~4 months ago, been playing it daily since. Coils appear to be in top shape, read good with DMM. Been fed a clean 2500rms from my mojo amp. Plays as good now as it did the day I got it back from SPLAudio, to quote him, "It's a beast". Has scratches on the basket, no biggie though.

When he rebuilt it he used an 8 layer coil. Anything else I can get info from him

Box is in great shape, carpet is coming up in a small spot around the port, can easily be glued back down, other than it's a solid box. Like I said I believe it's tuned to around 33hz.

If more info is needed on either, can easily get it from rabbit or corey

Price:

Looking to get 450 for both, might split it up if price is right. Open to trades, looking for 3 10's or 4 8's for my next project. Might be willing to work something out depending on what it is.

Make offers

Shipping and Miscellaneous Item Information:

Half and half, depends on deal. I don't cheap out on shipping though.

Item Pictures:

2rgyjko.jpg


f35e2w.jpg


23ms11.jpg


a31a2x.jpg


n532he.jpg


2hybhj7.jpg


2v9wtbs.jpg


2qatiq0.jpg


2rxbjg6.jpg


fum2qh.jpg


Album with sub and box

Album above has pics with coils/ohm readings/etc

Box is cellphone quality

 
Last edited by a moderator:
2ft^3 after displacements. 45s, double baffle, and proper bracing. Tuned to 35hz. Over all size would be 14h x 24.5 w x 20.75d

That's a copy and paste from the message rabbit sent me when he built it

I believe he messaged me later on and said he tuned it closer to 33hz though

Those measurements should be right, when I get home tonight I'll measure it again to verify

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Don't get me wrong I've built a few boxes myself and I love doing it and it would've been preferred. But I now live in a one bed room apartment...
42
9K
I would face the port and sub back. Even if you got a soft top, the rear gate will serve as a loading wall. I looked at the specs for the 10w6v3...
3
2K
Just trim strands until it fits. Then put some heat shrink or electrical tape on it.
104
11K

About this thread

tpmeredith

10+ year member
Senior VIP Member
Thread starter
tpmeredith
Joined
Location
Murfreesboro, TN
Start date
Participants
Who Replied
Replies
21
Views
3,534
Last reply date
Last reply from
tpmeredith
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top