SOLD 10" Fi BL Dual 2 Ohm- FRESHLY RECONED

Joseph K
10+ year member

Senior VIP Member
306
0
Arkansas
I am selling my 10" D2 Fi BL. I had it in an underseat ported box with around 900 watts going to it daily. I fried one of the tinsel leads about 3 months ago, and sent it off to Fi. They reconed it with the integrated leads, so that can't happen again. So pretty much, this is a brand new 10" BL, it's not really even broken in yet. I haven't really been playing it too much the last few months. I'm switching to two 12"s sealed.

I would rate it 10/10 on appearance and 10/10 on performance. These are awesome, BEEFY subs.

Specs:

DUAL 1 | DUAL 2

Fs: 37.1 Hz | 37.1 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 4.62 | 4.62

Qes: .23 | .23

Qts: .22 | .22

Mms: 191g | 191g

Cms: 0.96mm/N | 0.96mm/N

Sd: 310cm^2 | 310cm^2

Vas: 13.0 l | 13.0 l

Spl: 86.2dB 1W/1m | 86.2dB 1W/1m

Bl: 16.6 N/A | 22.7 N/A

Xmax: 18mm | 18mm

Rms: 1000W * | 1000W *

Sealed box: N/A cuft | N/A cuft

Ported box: .7-1.5cuft | .7-1.5cuft

Sub OD: 11.000” | 11.000”

Cut ID: 9.250” | 9.250”

Mounting depth: 6.250” | 6.250”

Displacement: 0.16cuft | 0.16cuft

https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154bbe1697830f5/shopdata/0050_Speakers/0020_BL/product_overview.shopscript

Asking $225 plus shipping. Not really sure on that price, so feel free to make offers. I don't know what these are going for slightly used... Will have pictures up later. I have lots of refs on this site as well if anyone needs them. Thanks!

 
BL's are beefy as ****. Ordered an 18'' BL last week and I piss myself everyday thinking about it. Never heard a 10'' BL though.
Haha yes, just a little bit. **** it weighs more than my 15" Q did. It handled every bit of ~1300 RMS when I used to have the gains up all the way... Yet for some reason I'm having trouble selling it...

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
135
These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
449
Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
5
944
Assuming the box is made of .75" MDF the 12"x20"x15" box is 1.5 Cu Feet. The 33"x19"x15" is 4.3 cubic feet, something is not right here. JL has...
3
892

About this thread

Joseph K

10+ year member
Senior VIP Member
Thread starter
Joseph K
Joined
Location
Arkansas
Start date
Participants
Who Replied
Replies
53
Views
3,623
Last reply date
Last reply from
Jaredturp
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0

New threads

Top