Zeuslicious 5,000+ posts
<< 28hz feels good
1. Product:
15" Custom Destroyer D1 ohms W/Blue Ti Basket/TC Spiders+ CF Cap and QCA Rings.
2. Specs:
15" Custom RE Destroyer, Dual 1 ohm, 4" 4 layer fw Alum Coil with Cooling added to the Former for more Thermal Handeling, Blue TC/Ti Basket, TC Spaced Spider Pack with leads sew in, Paper Cone with Custom Black CF Cap.
I built the Sub with TC Sounds QCA Rings and be able to swap Assemblies in less than 1 minute...
The sub Was Built for both daily & Comp aplication so I'll say 2500-4000w. Way more if you know what you do.
3. Description/Condition:
Good Condition as you can see in the pics. Motor is used and Basket and soft parts are new.
(Drescription and condition is imho, Please check the pics because thats what you'll be getting) I do have an extra 12" D.5 Assemblie that also fits to the motor if interested... (Pme a serious offer on all 3 items and I'll do it!)
4. Price:
I would like to get $600 Plus real shipping, (If you don't like my price please source all the parts and build your own Custom to see how much you save)
NO TRADES! NO TRADES! NO TRADES!
5. Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
15" Custom Destroyer D1 ohms W/Blue Ti Basket/TC Spiders+ CF Cap and QCA Rings.
2. Specs:
15" Custom RE Destroyer, Dual 1 ohm, 4" 4 layer fw Alum Coil with Cooling added to the Former for more Thermal Handeling, Blue TC/Ti Basket, TC Spaced Spider Pack with leads sew in, Paper Cone with Custom Black CF Cap.
I built the Sub with TC Sounds QCA Rings and be able to swap Assemblies in less than 1 minute...
The sub Was Built for both daily & Comp aplication so I'll say 2500-4000w. Way more if you know what you do.
3. Description/Condition:
Good Condition as you can see in the pics. Motor is used and Basket and soft parts are new.
(Drescription and condition is imho, Please check the pics because thats what you'll be getting) I do have an extra 12" D.5 Assemblie that also fits to the motor if interested... (Pme a serious offer on all 3 items and I'll do it!)
4. Price:
I would like to get $600 Plus real shipping, (If you don't like my price please source all the parts and build your own Custom to see how much you save)
NO TRADES! NO TRADES! NO TRADES!
5. Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).