pshoup06 10+ year member
Junior Member
i have two hc2400 and the battery terminals are too big for the rings that of course are only 3/8" what should i do so then i can make this all work
Drill out the ring to fit. If you know someone that has a Unibit it will make things much easier.Well i must not be clarifing this the battery post is to big for the ring i have on my wire im sorry
by ring do you mean terminal? or an O ring? if you are using the posts i would buy after market terminals if you are using the bolts (kinetik comes with both) i would get rings that allowed the bolts to fit and had a propper contact areaWell i must not be clarifing this the battery post is to big for the ring i have on my wire im sorry
try these .....they sell them at advanced auto parts.
I have bolts i only got one set i was wondering if i could just buy another set at lowes and use those so then i can wire my other two batteries in parallelby ring do you mean terminal? or an O ring? if you are using the posts i would buy after market terminals if you are using the bolts (kinetik comes with both) i would get rings that allowed the bolts to fit and had a propper contact area