apeterson26
Member
Was wondering if its possible to build a ported box for dual sa10s underneath crew cab back seat for 2014 silverado if i install a 2" seat lift ?
I believe there is some difference between years, the 14+ have less height and less trans hump. However just measure and see, it might work but you'll be lifting more than 2 inches. Be careful how much over 2" you go or the hooks wont grab the back wall.I have a box i built already for my 2010 supercrew i just got rid of, front firing about 3.1cubes
So what exactly is the point of this entire thread? Anyone that posts something useful you already have an answer for...Yea LMI is way too high i will just get our sheet metal shop to laser me out the brackets
The 3.1 cubes shouldn't be too hard gross, but 3.1 cubes net with proper port area is going to be a challenge. I think without my storage area I'm close to 2 cubes net with 22 sq in of port area.Was trying to find out if anyone has built a proper size box under the rear seat for dual sa10s