Alpine SWS-12D2 Enclosure

  • 2
    Participant count
  • Participant list

Jmabrao
10+ year member

Member
Hey I'm going to building a new box for my alpine, and came up with 2.5cf tuned to 32 hz. Was hoping someone would be able to spot check my work and see if I'm way off. I have been hearing that 2.5cf was too big for this subwoofer, and that you need to keep it around 1.5cf.

ps the orange is the 2.5cf @ 32hz and the red is 1.5cf @ 32hz

Thanks

Joel

25cftuned32hz.jpg


Boxes.jpg


 
2.5 might be a little big. `1.5 seems little small. i did a few boxes for the type S a few years ago. dropped one in a 2 cube box @ 35hz that i had actually built for a type R. it did well playing the test songs, which were heavy metal and rap songs. the other one i did, i built specifically for a 12 type S. 1.85 @ 34hz. this guy was a metal listener, and it performed well. From the numerous boxes i have done for alpine type R, they dont do too bad in larger boxes. i have put a type R in 2.5 cubes, although i used higher port tunings, and they do very well in the larger box. you have a hump in the lower frequencies on your graph, which will be accentuated by cabin gain. the smaller box has a better roll off for music listening, IMO.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

The cutting it off part is what I'm confused about now. The speakers in my car have two wires coming off of them but I would only have one wire on...
2
209
The Type R subs are a really great sub. Deff ask about a DMM reading or take a DMM and check them. Dust Caps can be replaced as stated and...
7
485
So far I have bought Kicker CWRT8D4 Subthump underseat enclosure for 8 LoopBack Harness from AIS 8 gauge Kicker wiring kit (Will run two 8 gauge...
13
1K
FOR SALE Alpine PDX-V9
As the title states, I'm selling my Alpine PDX-V9. This is a 5-channel amp, with 500 watts being delivered to the sub channel (2-4 ohms) and 100...
0
409
Any indication that a loose wire may be the issue? I'd start by checking all the +/- connections to see if one has come lose or is starting to...
1
556

About this thread

Jmabrao

10+ year member
Member
Thread starter
Jmabrao
Joined
Location
Grants Pass, OR
Start date
Participants
Who Replied
Replies
1
Views
2,056
Last reply date
Last reply from
azimuth
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top