Gramps can't build sh!t. Only thing he can build is a long list of excuses.Like you already should know, prefab boxes are crap.. They are for people who do not know better. The fact that you have been searching for one that doesnt "****" shows that even you know they are crappy.
Before you go using/building an enclosure, you need the specs of your sub so that you can properly size the box and port volumes. You cannot just go buy a ported enclosure and have it magically sound good with any (12") sub. At worst, you may blow your sub due to too much airspace or too low of tuning below the fs of the sub.
If you're really a gramps, learn to build an enclosure and stop wasting time considering a pre-fab box.
um dude i have a custom box u just coming in on this conversation that has nothing to do with and u missed something.. this is my box and i've been in car audio for over 20yrsLike you already should know, prefab boxes are crap.. They are for people who do not know better. The fact that you have been searching for one that doesnt "****" shows that even you know they are crappy.
Before you go using/building an enclosure, you need the specs of your sub so that you can properly size the box and port volumes. You cannot just go buy a ported enclosure and have it magically sound good with any (12") sub. At worst, you may blow your sub due to too much airspace or too low of tuning below the fs of the sub.
If you're really a gramps, learn to build an enclosure and stop wasting time considering a pre-fab box.
if theres a REASON for the port to be small on the 15" box why is the 12" port bigger.. u the one arguing for no reason.. any time else someone showed that box 1st thing everyone would say is port is too small but now u think port 1/2 of what most should be is ok with u?because you have no clue why they have the port that small. this box will probably still be louder than whatever you design gramps.
even hertz is using 1 now.. not everyone wants to spend $200 on a box nor has the tools to make one.. seen many people on here that have big systems don't make boxes yet i'm the only ones gets **** on for not making a box..Whats funny is that he claims to know how to design a box and just ends up scouring the net for prefabs and goes and tells noobs that prefabs are fine. What a fu ckin tard.
You don't need an arsenal of tools, a drill and a jisaw is all you need. If you dont have a drill then a couple of bar clamps work well to clamp the glue. The last few boxes i made i quit using screws and just glue and clamp the *****.even hertz is using 1 now.. not everyone wants to spend $200 on a box nor has the tools to make one.. seen many people on here that have big systems don't make boxes yet i'm the only ones gets **** on for not making a box..
But the pioneer should be the best.Cheap bass equipment is the common thread. Selling more cheap bass equipment is the algorithm!
Another weird post?.. ^^^... this is getting tediousIts looks nice, rly. But like said JOHN >>
But the pioneer should be the best.
Oh i forgot i u looking for highly valued repair shop i recommend https://www.steeringlpsr.com/ some of the best !
Bahahahahahaa. You need a handsaw, drill and a screwdriver. A jig saw would be easier, but not needed. A sheet or two of MDF, cheap caulk and some drywall screws for materials. That's 50 bucks. Gimme a break dude. I can see that you really are just full of crapeven hertz is using 1 now.. not everyone wants to spend $200 on a box nor has the tools to make one.. seen many people on here that have big systems don't make boxes yet i'm the only ones gets **** on for not making a box..
oops...lol. Yeah, exactly!You don't need an arsenal of tools, a drill and a jisaw is all you need. If you dont have a drill then a couple of bar clamps work well to clamp the glue. The last few boxes i made i quit using screws and just glue and clamp the *****.
If you arent smart enough to buy a drill and jigsaw from a big box retailer and then return them when you are done using them then you should just kill yourself.
i actually have 2 drills and a new never used jigsaw.. but getting wood to house kind of a pain and i can't cut a straight line or a circle., i've tried.. why waste time $ and materials? i still don't get why i'm the only one that gets all this crap for not making box when 1/4 people that come on here buy boxes.. alo i was the one saying that prefab was crap jeff was the one saying it was good so why am i getting the hate?Bahahahahahaa. You need a handsaw, drill and a screwdriver. A jig saw would be easier, but not needed. A sheet or two of MDF, cheap caulk and some drywall screws for materials. That's 50 bucks. Gimme a break dude. I can see that you really are just full of crap
fuck off spammer ???Its looks nice, rly. But like said JOHN >>
But the pioneer should be the best.
Oh i forgot i u looking for highly valued repair shop i recommend https://www.steeringlpsr.com/ some of the best !
i actually have 2 drills and a new never used jigsaw.. but getting wood to house kind of a pain and i can't cut a straight line or a circle., i've tried.. why waste time $ and materials? i still don't get why i'm the only one that gets all this crap for not making box when 1/4 people that come on here buy boxes.. alo i was the one saying that prefab was crap jeff was the one saying it was good so why am i getting the hate?