Know I'm fuc*en Pis*ed off!!!!

[stealitall 10+ year member]

I thought this **** was Going to be good!!! I been having nothing but trouble since I had them installed ( Rainbows Look below ). First I thought OK just maybe they did something wrong when they installed them so I thought mabey my new HU Im getting would fix what ever it was . At first I thought it was the old HU but its not the crossover has a safe guard in them so that if it gets to be to much Power it lowers the VOL . But the weird part is that I'm not even turning them up that loud. Second is that if you look at the pics the first one it happened a week ago and I just sent it out yesterday know today the same ****ing thing happened again no-less the same side just the front this time //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif . Man I want there 1800 # so I can call them and vent !!!!! And please no smart remarks Thanks!! And yes Gram-mer ***** you don't have to tell me Dam. There is always One or two out there that have to say something to get a post!!!!

Here is the first one.

And the second one

Click to read more...

 

[mikeyboc 10+ year member]

Well, ****. How did they sound?

 

[bigbangtheory 5,000+ posts]

I had a hell of a time reading that as well. Anyway, good luck getting those fixed. Some nice comps though.

 

[mikeyboc 10+ year member]

Sensative I see.

I be pissed about the X-overs too, though.

 

[Berry47 10+ year member]

I broke 2 dayton rs's trying to get the shielding off. Stuff that invloves breaking *****.

 

[headless 10+ year member]

Rough. Can you see what caused the breakage? did the wire melt, or just snap? Where were the x-overs mounted?

 

[stealitall 10+ year member]

It looks like a clean snap. Funny thing its the same 1 as the other. looks like the glue came off it started to shake and guess it snapped. I got and STI So maybe the car is Ruff on them I mean the shocks are hard as hell!!!

 

[headless 10+ year member]

Where were the x-overs mounted?

 

[stealitall 10+ year member]

Inside the door panel self tapped to the door!!

 

[headless 10+ year member]

Inside the door panel self tapped to the door!!

Makes me glad i mounted mine in the trunk. Think maybe you have door-slam-happy passengers? Something to consider.

 

[guy022077 10+ year member]

thats nothing a little solder wont fix...sorry for your loss,good luck.

 

[ss3079 5,000+ posts]

A component came unglued and a lead/solder joint broke?

If it's not under warranty, just re-glue the component down and re-solder the joint.

Too bad that it happened, though.

 

[BigOso 10+ year member]

try soldering it maybe that will calm your woes.

 

[stealitall 10+ year member]

Well I could but I would have to take it all apart. It's 2 parts inner and a shell that goes around it and you have to now how to take it apart with out snapping it. Yes its under warranty but just a pain in the ass to send it out and pay for shipping. And I'm lucky I got pissed of and I took the driver side doors apart and found the driver side was just cumin loose so I hot glued the ****er down be for it broke!//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[filtor1 10+ year member]

What would possess you to mount a crossover in the door. It is one of the most volitale places to mount something other than the engine bay. Major vabrations, moisture, coupled with someone slamming the door just so can easily break a crossover. I feel for ya man b/c I had to learn the hard way too. Good luck and spend the extra 15 minutes to run the extra few feet of wire to find a better mounting location.