MTX Jack Hammer Amplifiers

They do decent power but are cheaply made. very light and weak metal. I screwed down a JH600 to a display board one time and it started whining, so i loosened a screw and it stopped. The Jackhammer series is nothing like the jackhammer 22. But the 22 doesnt even get that loud considering. Plus they burn up easily. The MTX Escalade that has 2 22's has had to recone them a few times. Like on mythbusters.

 
They do decent power but are cheaply made. very light and weak metal. I screwed down a JH600 to a display board one time and it started whining, so i loosened a screw and it stopped. The Jackhammer series is nothing like the jackhammer 22. But the 22 doesnt even get that loud considering. Plus they burn up easily. The MTX Escalade that has 2 22's has had to recone them a few times. Like on mythbusters.
Wow, that *****... isn't the JH600 a D-class amp. it should run cool anyway, right ?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
765
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

BigCatSmile

10+ year member
VW GTI
Thread starter
BigCatSmile
Joined
Location
- Dallas, Tx
Start date
Participants
Who Replied
Replies
8
Views
856
Last reply date
Last reply from
BigCatSmile
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top