Need help with distribution block

[Sye671]

I have a skar skv2 2500 and a pioneer GM-D8604 and i know i need a distribution block just wondering if i can use a 0 gauge in and have a 0 gauge and a 4 gauge coming out? All help is appreciated, thank you.

Click to read more...

 

[1aespinoza 10+ year member]

I have a skar skv2 2500 and a pioneer GM-D8604 and i know i need a distribution block just wondering if i can use a 0 gauge in and have a 0 gauge and a 4 gauge coming out? All help is appreciated, thank you.

Yes, it is ok. You will seldom hit those max voltages so no worries.

 

[audiobaun 5,000+ posts]

I have a skar skv2 2500 and a pioneer GM-D8604 and i know i need a distribution block just wondering if i can use a 0 gauge in and have a 0 gauge and a 4 gauge coming out? All help is appreciated, thank you.

Absolutely with a distro block with those outlets.You can even get a reducer for the 4ga to fit the 0ga outlet for a much tighter fit. Some blocks come with reducing sleeves

 

[Sye671]

How many amp fuse should i use for the distribution block? My in line fuse is 250 amps before the block

 

[1aespinoza 10+ year member]

How many amp fuse should i use for the distribution block? My in line fuse is 250 amps before the block

Use the amperage of the amplifier that each wire goes to.

 

[audiobaun 5,000+ posts]

Whatever the amplifiers call for/ specs speculate

 

[Sye671]

 

[Sye671]

View attachment 40495

Just wondering if i can have 1 input and have 2 outputs or will i have to use two inputs for the distribution block on the bottom?

 

[deez283 10+ year member]

Just wondering if i can have 1 input and have 2 outputs or will i have to use two inputs for the distribution block on the bottom?

You could make the bottom one work with one power input by adding a bar across on that end and would have two outputs.

Otherwise in stock form the bottom one is a dual input/output.

 

[some dude]

H
Knukonceptz has 1 with 2 0gauge in and 2 0gauge out and 1 4gauge out.

 

[1aespinoza 10+ year member]

Just wondering if i can have 1 input and have 2 outputs or will i have to use two inputs for the distribution block on the bottom?

I would just wrap bare wire on the input side lugs and tighten them with the nuts .

 

[some dude]