Post your home audio setups. Here is mine.

I also just posted a thread about this, but i figure i might as well add a couple of the pics to this collection too...

DSCN2345.jpg


DSCN2348.jpg


 
until i get an amp for my car i decided to put my to subs to use //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif this is just a temporary room set up.

IMG_0599.jpg


 
My little setup:

Monster power HTS1600

42" LG 1080p (42LG20)

Samsung BD-UP5000 Blu Ray/HD DVD duo

Yamaha RX-V659 7.1

Klipsch center

Klipsch in-ceiling for front and rear stage in 3 cubes sealed x-overed at 85hz

Martin Logan dynamo 10 x-over set at 85hz with sub sonic set at 30hz.

I have to say it sounds so so séxy :) I'll post pics soon.

 
Here is the living room 2 ch system in my home in Florida...

PC160063.jpg


and with the grilles off and different angle

PC160068.jpg


Infinity Kappa 6.1's and a Klipsch sub. Magnavox 6v6 pp tubes for the bass on the Kappa's

Under that amp is a Motorola SE EL84 tuber for the upper end. HK pre, HK tuner and an Audio Source EQ.

The Maggie 6v6 is about 15-20 wpc and the Moto SE amp is a "flea" amp at about 5 wpc.

And a Carver TFM 15-CB for when I need some extra umph for the Kappa's.

 
Here are pics of the "Man Cave" and Living room systems in my Ga home.

The man cave...

PC0401582-1.jpg


and a close up of the amp

PC0401602.jpg


JBL Venue series, "Stage" model speakers, Yama CX-630 pre and tuner, Thorns TD-145 TT with Grado cart.

Will Vincent built and modded ST70 tuber.

The living room/main system.

PC040166.jpg


PC040168.jpg


In this we have my 4 year old, Mirage M5's, HK tuner/pre, Carver TFM25 and a totally moded Bob Latino built "ST120" tuber.

The ST120 is a KT88 based ST70. There are no Dynaco parts on this amp, everything is 100% new. It weighs just over 60lbs and is 60 wpc of tube power! Every bit as powerful as the Carver.

Its running EH 6550's, a Weber Copper cap for the rectifier, and 3 Jan/Phillips 12AT7's.

Close up of the ST120

PC280111.jpg


PC270095.jpg


(close ups are from when it was still in the FL house)

-Vic

 
djstation027.jpg


2 KRK Rokit-6 studio monitors

4 Ascendant Audio 6.75" Mids //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

2 Pioneer CDJ-800 MK2 Cd turn tables

1 Pioneer DJM-707 Mixer

1 Technics 1210 MK2

Technics Reciever, cd player, tape deck (my grandpa's stereo)

Sennheiser hd-595 open ear headphones (not good for mixing on tho)

This is built inside an old RCA victor Phonograph cabinet

 
Last edited by a moderator:
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yes. Ring terminals will work great. crimp them pretty good. You can hit with solder to make a secure solid connection, and then Heat shrink over...
3
265
This $100 over your budget but it checks every other box https://stereointegrity.com/product/bm-11/
10
2K
Yes, Winky was triggered and butt hurt enough to start **** when I wasn't even talking to him.
9
2K
Looking for an inexpensive double din head unit that has the following: Front/Rear/Sub outputs XM Ready Just want some ideas
0
997
Here is the plan. My car is on a bit of an incline, the nose is sitting about half a foot higher than the rear. The little bit of windshield...
6
525

About this thread

bigbangtheory

5,000+ posts
CarAudio.com Veteran
Thread starter
bigbangtheory
Joined
Location
Venus or Mars, just depends.
Start date
Participants
Who Replied
Replies
1,144
Views
212,621
Last reply date
Last reply from
Jeffdachef
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0
IMG_3567.jpg

RedRyder18

    May 11, 2024
  • 0
  • 0

New threads

Top