Post your home audio setups. Here is mine.

I also just posted a thread about this, but i figure i might as well add a couple of the pics to this collection too...

DSCN2345.jpg


DSCN2348.jpg


 
until i get an amp for my car i decided to put my to subs to use //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif this is just a temporary room set up.

IMG_0599.jpg


 
My little setup:

Monster power HTS1600

42" LG 1080p (42LG20)

Samsung BD-UP5000 Blu Ray/HD DVD duo

Yamaha RX-V659 7.1

Klipsch center

Klipsch in-ceiling for front and rear stage in 3 cubes sealed x-overed at 85hz

Martin Logan dynamo 10 x-over set at 85hz with sub sonic set at 30hz.

I have to say it sounds so so séxy :) I'll post pics soon.

 
Here is the living room 2 ch system in my home in Florida...

PC160063.jpg


and with the grilles off and different angle

PC160068.jpg


Infinity Kappa 6.1's and a Klipsch sub. Magnavox 6v6 pp tubes for the bass on the Kappa's

Under that amp is a Motorola SE EL84 tuber for the upper end. HK pre, HK tuner and an Audio Source EQ.

The Maggie 6v6 is about 15-20 wpc and the Moto SE amp is a "flea" amp at about 5 wpc.

And a Carver TFM 15-CB for when I need some extra umph for the Kappa's.

 
Here are pics of the "Man Cave" and Living room systems in my Ga home.

The man cave...

PC0401582-1.jpg


and a close up of the amp

PC0401602.jpg


JBL Venue series, "Stage" model speakers, Yama CX-630 pre and tuner, Thorns TD-145 TT with Grado cart.

Will Vincent built and modded ST70 tuber.

The living room/main system.

PC040166.jpg


PC040168.jpg


In this we have my 4 year old, Mirage M5's, HK tuner/pre, Carver TFM25 and a totally moded Bob Latino built "ST120" tuber.

The ST120 is a KT88 based ST70. There are no Dynaco parts on this amp, everything is 100% new. It weighs just over 60lbs and is 60 wpc of tube power! Every bit as powerful as the Carver.

Its running EH 6550's, a Weber Copper cap for the rectifier, and 3 Jan/Phillips 12AT7's.

Close up of the ST120

PC280111.jpg


PC270095.jpg


(close ups are from when it was still in the FL house)

-Vic

 
djstation027.jpg


2 KRK Rokit-6 studio monitors

4 Ascendant Audio 6.75" Mids //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

2 Pioneer CDJ-800 MK2 Cd turn tables

1 Pioneer DJM-707 Mixer

1 Technics 1210 MK2

Technics Reciever, cd player, tape deck (my grandpa's stereo)

Sennheiser hd-595 open ear headphones (not good for mixing on tho)

This is built inside an old RCA victor Phonograph cabinet

 
Last edited by a moderator:
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yes. Ring terminals will work great. crimp them pretty good. You can hit with solder to make a secure solid connection, and then Heat shrink over...
3
272
This $100 over your budget but it checks every other box https://stereointegrity.com/product/bm-11/
10
2K
Yes, Winky was triggered and butt hurt enough to start **** when I wasn't even talking to him.
9
2K
Looking for an inexpensive double din head unit that has the following: Front/Rear/Sub outputs XM Ready Just want some ideas
0
997
Here is the plan. My car is on a bit of an incline, the nose is sitting about half a foot higher than the rear. The little bit of windshield...
6
532

About this thread

bigbangtheory

5,000+ posts
CarAudio.com Veteran
Thread starter
bigbangtheory
Joined
Location
Venus or Mars, just depends.
Start date
Participants
Who Replied
Replies
1,144
Views
212,628
Last reply date
Last reply from
Jeffdachef
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top