Mustang563
Junior Member
I need some help in making a box for 2 12 inch Kicker L3 subs. The box is going to be in a 2005 to 2007 V6 Mustang so I am putting the subs facing up so it will easily fit.
Specs for 1 of my Kicker L3 square subs
2ohm, 800 watt max, 400 rms, 31.37 Hz, 86.3 sensitivity, QMS 9.198, Qes .796, Qts .733, Hole cut-out diameter 11-1/16 inches, mounting depth 6-1/4 inches.
My box dimensions I thought sounded good are Height 9 inches, Width 32 or 34 inches, Depth of 16 inches. The 2 square subs would be on top and they would be facing up. My question is how and where should I port it so my box is tuned to about 31 Hz? I usually listen to rap if that helps at all.I don't have much experience building sub boxes and I need all the help I can get. Thank you!
Specs for 1 of my Kicker L3 square subs
2ohm, 800 watt max, 400 rms, 31.37 Hz, 86.3 sensitivity, QMS 9.198, Qes .796, Qts .733, Hole cut-out diameter 11-1/16 inches, mounting depth 6-1/4 inches.
My box dimensions I thought sounded good are Height 9 inches, Width 32 or 34 inches, Depth of 16 inches. The 2 square subs would be on top and they would be facing up. My question is how and where should I port it so my box is tuned to about 31 Hz? I usually listen to rap if that helps at all.I don't have much experience building sub boxes and I need all the help I can get. Thank you!