Soundstream S10 XTREME build 40k + watts!

[Farmacist 10+ year member]

any place around here locally that sells it? I'm going to stay away from the aerosol version, I've had that screw up stuff before, I mean getting it on things that you didn't want stripped.

 

[Ken448 10+ year member]

Pretty sure Ive seen it at Lowes, If not, Painters Supply most definitely sells it in LP

 

[pickup1 5,000+ posts]

Man,could almost do the v8 swap while you got it apart!

Are you going to rebuild the motor at all?I'd throw a small cam or something...

 

[Ken448 10+ year member]

You can do a shitton to these 4.3's to scavenge power out of them. They are just a 350 with 2 pistons removed from them. A little head work goes a long way

 

[Farmacist 10+ year member]

no room for v8 swap when im adding 2 more alts.

I was thinking of camming it but I hate the sound they make (like its going to choke out in idle)

its getting new headers, sparkplug wires, spark plugs, gaskets and a few other things.

 

[ChevyRidinLow]

this is soooo puss, you have no money. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[SoCalNoob 10+ year member]

thats perty man nice work so far! love the 15k's some serious powa there!

 

[Farmacist 10+ year member]

this is soooo puss, you have no money. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

you are so right, I really don't...

 

[ChevyRidinLow]

looks very promising. how long you estimating till shes done?

 

[SPL140.2 5,000+ posts]

tons of work great job

 

[Farmacist 10+ year member]

looks very promising. how long you estimating till shes done?

Well it should be back in driving mode by mid march, this painting is seriously taking 100000 times longer than I thought.. I'll probably have the full system running for sure by slamology - that's when I'm making the debut. It was supposed to be SBN, but there's just no time and I refuse to cut corners with the underbody for just 1 show.

 

[ChevyRidinLow]

Well it should be back in driving mode by mid march, this painting is seriously taking 100000 times longer than I thought.. I'll probably have the full system running for sure by slamology - that's when I'm making the debut. It was supposed to be SBN, but there's just no time and I refuse to cut corners with the underbody for just 1 show.

good man

 

[Farmacist 10+ year member]

well finally started painting, hopefully I can get these done overnight. I hate dry times... I'm literally watching paint dry //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

In all there's going to be 4 coats of paint,

2 coats of POR-15 silver, and 2 coats of POR-15 engine enamel (aluminum)

Por-15 is supposed to go on very thin, so if it looks like I missed a couple spots, its because they'll be covered better with the next coat.

 

[CoilBurner]

Not making deadlines??

Seems so familiar.....

 

[Farmacist 10+ year member]

Kinda fell asleep while waiting for the paint to dry, but the heads are now ready for enamel, and I also put a coat on my front springs.

The springs will be top coated with Flex Cote red //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif