Install Advice

[audiobaun 5,000+ posts]

How do you go about getting speaker wire from the doors to an amp? What's the easiest method for this?

My kickers are

• handles up to 75 watts RMS (225 watts peak power)

Its not that hard man. More time consuming getting the door panels off and unlocking the door boot on each side and putting back together

 

[Chris04626]

No easy way. Its generally a fight.But Run through the wire boots in the doors, and remove the bottom door seals and run them along those work fine. 16 ga OFCwire will work just fine for those speakers to the amplifier. Its worth the time spent to put speakers on an amplifier.Every pennies worth

So id unhook the factory wiring from headunit and run new wire from speaker to amp. Wouldn't u lose control of those speakers at the head unit?

 

[audiobaun 5,000+ posts]

AMPKIT-0GA-ELITE // 0 Gauge 3500 Watt Amplifier Wiring Kit (OFC)

The CT Sounds 0 gauge OFC complete amplifier wiring installation kit is perfect for systems rated up to 3500 watts and includes everything from a waterproof fuse holder to a bundle of zip ties for cable management to get your stereo going faster.

www.ctsounds.com

Solid Ground Block

https://www.amazon.com/dp/B00MR1LPE0/?tag=caraudiocom-20

Dual Mini ANL Fused Distro Block

Amazon.com: XSCORPION DMANL3024P Platinum Mini ANL Digital Distribution Block : Automotive

Buy XSCORPION DMANL3024P Platinum Mini ANL Digital Distribution Block: Fuses - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

100 amp fuses for the CT 1k amp

https://www.amazon.com/dp/B0047XW8YW/?tag=caraudiocom-20

Fuse for the 4 ch Avatar amplifier

https://www.amazon.com/dp/B004WK4TDS/?tag=caraudiocom-20

Speaker wire

https://www.amazon.com/dp/B0848L385Y/?tag=caraudiocom-20

 

[audiobaun 5,000+ posts]

So id unhook the factory wiring from headunit and run new wire from speaker to amp. Wouldn't u lose control of those speakers at the head unit?

You will run signal from RCA to amplifier from HU same with Sub amp. Control at HU

 

[Chris04626]

You will run signal from RCA to amplifier from HU same with Sub amp. Control at HU

Gotcha. I dunno if I have multiple rca connectors at the head unit for multiple amps though

 

[audiobaun 5,000+ posts]

https://www.amazon.com/dp/B00EFFSCGU/?tag=caraudiocom-20

 

[audiobaun 5,000+ posts]

Gotcha. I dunno if I have multiple rca connectors at the head unit for multiple amps though

Ill have check

 

[audiobaun 5,000+ posts]

Gotcha. I dunno if I have multiple rca connectors at the head unit for multiple amps though

https://www.sonicelectronix.com/item-193291-Sony-XAV-AX3200-XAVAX3200.html?utm_source=google&utm_medium=cpc&utm_campaign=PLA&utm_source=google&utm_medium=cpc&utm_campaignid=15216902354&utm_matchtype=&utm_keyword=&utm_device=c&utm_content=530823007194&utm_devicemodel=&utm_network=g&utm_loc_physical_ms=9026902&utm_loc_interest_ms=&utm_placement=&utm_adposition=&gclid=Cj0KCQjwvZCZBhCiARIsAPXbajt-jSKlYJJZgpd0c5hFhi42cIPdzVhI1oYi3EdPcgsduS2KgGxhmxMaAiV8EALw_wcB

You have 3 sets.. Front.. Rear.. and Sub. You will only be using Front and Sub , unless you decide to amp the rear speakers for the passengers.? Do like 25-watts rms to those. You will or should have enough Speaker wire left, and I chose the 4 ch RCAs for future use on 4 ch as the amp kit has one set that can be used for sub amp

 

[Chris04626]

https://www.sonicelectronix.com/item-193291-Sony-XAV-AX3200-XAVAX3200.html?utm_source=google&utm_medium=cpc&utm_campaign=PLA&utm_source=google&utm_medium=cpc&utm_campaignid=15216902354&utm_matchtype=&utm_keyword=&utm_device=c&utm_content=530823007194&utm_devicemodel=&utm_network=g&utm_loc_physical_ms=9026902&utm_loc_interest_ms=&utm_placement=&utm_adposition=&gclid=Cj0KCQjwvZCZBhCiARIsAPXbajt-jSKlYJJZgpd0c5hFhi42cIPdzVhI1oYi3EdPcgsduS2KgGxhmxMaAiV8EALw_wcB

You have 3 sets.. Front.. Rear.. and Sub. You will only be using Front and Sub , unless you decide to amp the rear speakers for the passengers.? Do like 25-watts rms to those. You will or should have enough Speaker wire left, and I chose the 4 ch RCAs for future use on 4 ch as the amp kit has one set that can be used for sub amp

Whatever adapter crutchfield wired in has some RCA cables on it to I'm not sure what exactly they are for. I had them do the steering wheel control adapter and they connected everything together and there was rca cables mixed in

 

[audiobaun 5,000+ posts]

Whatever adapter crutchfield wired in has some RCA cables on it to I'm not sure what exactly they are for. I had them do the steering wheel control adapter and they connected everything together and there was rca cables mixed in

hmm. prob going need a few picks of that when you pull deck out to see whats wired up and not

 

[Chris04626]

hmm. prob going need a few picks of that when you pull deck out to see whats wired up and not

I believe one was labeled subwoofer but I can't remember now

 

[Chris04626]

hmm. prob going need a few picks of that when you pull deck out to see whats wired up and not

 

[audiobaun 5,000+ posts]

I believe one was labeled subwoofer but I can't remember now

You have NEW wires in kits, so that you know what they go too and that they are not damaged or exposed on the wiring jackets, and solid

 

[Chris04626]

You have NEW wires in kits, so that you know what they go too and that they are not damaged or exposed on the wiring jackets, and solid

This is what they used

 

[audiobaun 5,000+ posts]

That shouldnt affect anything as you ae using the RCA input on the HUand on the Amplifier/amplifiers.