TJsTheName
Junior Member
I'm planning to trash the stock mids and highs in my truck so i've ordered a pair of DDaudio's VO-M6x9 and a pair of AW5.25. I'm fairly new to the whole car audio thing, so i'm trying to figure out what else i will need. Most likely an amp right? How do I figure how much wattage of an amp to install and such? I'm pretty sure I'll need wiring as well, any suggestions on what gauge to use? Here's the specs.
Thank you in advance and feel free to give me some opinions as well if you'd like.
Thank you in advance and feel free to give me some opinions as well if you'd like.
AW5.25
Power Band - Watts 120-360
VCD - in 1.5
Impedance S4
Frequency Response - Hz 50-18k
Fs - Hz 63.99 Hz
Qms 4.01
Qes 0.43
Qts 0.39
dBSPL 90.5
VO-M6x9
Power Band - Watts 60-300
VCD - in 1.5
Impedance S4
Frequency Response - Hz 100-10k
Fs - Hz 74.02
Qms 3.339
Qes 0.941
Qts 0.734
Vas - cu ft 0.515
dBSPL 95
Power Band - Watts 120-360
VCD - in 1.5
Impedance S4
Frequency Response - Hz 50-18k
Fs - Hz 63.99 Hz
Qms 4.01
Qes 0.43
Qts 0.39
dBSPL 90.5
VO-M6x9
Power Band - Watts 60-300
VCD - in 1.5
Impedance S4
Frequency Response - Hz 100-10k
Fs - Hz 74.02
Qms 3.339
Qes 0.941
Qts 0.734
Vas - cu ft 0.515
dBSPL 95