BassAddictJ 5,000+ posts
CarAudio.com Veteran
I decided to make a new thread since I'm back in town and have better updated pics...and I had a typo in the last mids thread title. All of these were purchased from Michael Munkittrick on DIYMA. He was the original owner (EQ was purchased back in the day, mids are about a year old) and he took very good care of them. No abuse or mistreatment, adult owned.
Item(s) for Sale:
PPI PAR-245 half din parametric EQ/Line Driver
//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif Front and Rear 10v rms outputs. 110db S/N Ratio. USA Made //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif
adjustable center freqs, clipping indicator (love it), Switchable red/green illumination.
...Some top notch low distortion preamp goodness.
Link to manual: http://www.precisionpower.com/Manuals/Accessory%20Manuals/Precision_Power_PAR245%20Equalizer.pdf
MSRP $549.00.
Illusion Audio IM6 6.5 Midbasses
Very nice SQ drivers from the IM6.1 component set. Rated 100w rms a piece, inverted magnet with a shallow 2.1 inch mounting depth. I bought 2 sets off Mike and have one set in my car. They are VERY impressive speakers. They get loud enough to keep up with the rest of my front and substage yet sound crisp sexy clean all at the same time. I havemine at 70hz-400hz and they kick ***, rated up to 3khz if you're doing a 2 way setup. The mids were used by Mike on 50w rms (below rated rms) for the year that he had them.
Link to manual: ::* i l l u s i o n** a u d i o* ::
I'm not sure what the MRSP on these are, but I know it's not cheap.
Item(s) Description/Condition:
The PAR-245 face is immaculate. The top and bottom have some super glue stuck to it from where it was previously mounted.... strictly cosmetic, and when mounted you wont even see these glue blemishes.
The IM6 mids are in excellent condition. They were a little dusty but I gave them a good detail and boy they are sexy. Often you get shallow mounted/inverted magnet speakers that dont give as good of results as typical speakers. These surpass most typical midbasses I've used as far as sound quality. I had some of hessdawg's generic ID OEM beefy *** midbasses for a while and these IM6's sound WWAAYY better.
Price:
PAR-245 - 125 shipped and insured FIRM. You will not find one cheaper, if you find one.
IM6 Mids - 115 shiped and insured FIRM.
No Trades....EXCEPT for an audiocontrol epic 160....thats it.
Item Pictures:
Par-245
A few of the illuminated dots on the knobs seem to be darker. There was a little bit of dirt/dust on there. After shooting these pics I went back and cleaned off the knobs and all of them glow brightly like the "low-mid" one as they should be.
Mids pics in next post
Refs: Years of feedback here.
Paypal is JayM_Productions@yahoo.com
PM me with any questions/concerns.
Item(s) for Sale:
PPI PAR-245 half din parametric EQ/Line Driver
//content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif Front and Rear 10v rms outputs. 110db S/N Ratio. USA Made //content.invisioncic.com/y282845/emoticons/yumyum.gif.0556df42231b304b9c995aefd13928a8.gif
adjustable center freqs, clipping indicator (love it), Switchable red/green illumination.
...Some top notch low distortion preamp goodness.
Link to manual: http://www.precisionpower.com/Manuals/Accessory%20Manuals/Precision_Power_PAR245%20Equalizer.pdf
MSRP $549.00.
Illusion Audio IM6 6.5 Midbasses
Very nice SQ drivers from the IM6.1 component set. Rated 100w rms a piece, inverted magnet with a shallow 2.1 inch mounting depth. I bought 2 sets off Mike and have one set in my car. They are VERY impressive speakers. They get loud enough to keep up with the rest of my front and substage yet sound crisp sexy clean all at the same time. I havemine at 70hz-400hz and they kick ***, rated up to 3khz if you're doing a 2 way setup. The mids were used by Mike on 50w rms (below rated rms) for the year that he had them.
Link to manual: ::* i l l u s i o n** a u d i o* ::
I'm not sure what the MRSP on these are, but I know it's not cheap.
Item(s) Description/Condition:
The PAR-245 face is immaculate. The top and bottom have some super glue stuck to it from where it was previously mounted.... strictly cosmetic, and when mounted you wont even see these glue blemishes.
The IM6 mids are in excellent condition. They were a little dusty but I gave them a good detail and boy they are sexy. Often you get shallow mounted/inverted magnet speakers that dont give as good of results as typical speakers. These surpass most typical midbasses I've used as far as sound quality. I had some of hessdawg's generic ID OEM beefy *** midbasses for a while and these IM6's sound WWAAYY better.
Price:
PAR-245 - 125 shipped and insured FIRM. You will not find one cheaper, if you find one.
IM6 Mids - 115 shiped and insured FIRM.
No Trades....EXCEPT for an audiocontrol epic 160....thats it.
Item Pictures:
Par-245
A few of the illuminated dots on the knobs seem to be darker. There was a little bit of dirt/dust on there. After shooting these pics I went back and cleaned off the knobs and all of them glow brightly like the "low-mid" one as they should be.
Mids pics in next post
Refs: Years of feedback here.
Paypal is JayM_Productions@yahoo.com
PM me with any questions/concerns.
Last edited by a moderator: