Silverado DDZ build

[Boomin_tahoe 5,000+ posts]

I'm sure he knows what needs to be fixed when it's that obvious, gotta give him a chance... going to school full time and working is a bitch. some of you lazy motherfuckers wouldn't understand unless you worked a 60-80hr week. I used to start school at 7, get off at 2 go to work and not get off until 10 or later

Oh trust me....ive done it all. Went to school plus worked f/t....I walso worked 2 f/t jobs doing 76 hours/week. Yeah. I'll never do that agian.

 

[adulbrich 5,000+ posts]

Got these today

I'm also getting a used six spoke for a discount

 

[los33]

Got these today

I'm also getting a used six spoke for a discount

Not enough!

Sent from my draconis using Tapatalk

 

[adulbrich 5,000+ posts]

Not enough!
Sent from my draconis using Tapatalk

Don't worry. I've got more sitting upstairs and out in the garage, actually

 

[adulbrich 5,000+ posts]

Got a lot done today //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Three minutes with a chisel took care of the excess glue

My children made it home safe & sound

Mounted my amp on top of the box. The top is double layered, the amp has an inch of foam under it, and the inside will be well braced with 1" threaded pipe. I think it will be fine.

The box is now double layered all around. I just have to cut the sub holes, finish coating the inside with resin, and give the port some length.

 

[Popwarhomie 5,000+ posts]

You got your stuff back from Murphy?

 

[Massive spl]

U should have just walled that bish!

 

[adulbrich 5,000+ posts]

You got your stuff back from Murphy?

Yes, finally.

Although I am missing a composite cone......

U should have just walled that bish!

My madre wouldn't let me //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Popwarhomie 5,000+ posts]

Yes, finally.
Although I am missing a composite cone......

Well ill be driving to his new place in GA soon to get my re cones.. Ill keep an eye out lol

 

[adulbrich 5,000+ posts]

Well ill be driving to his new place in GA soon to get my re cones.. Ill keep an eye out lol

Lol, thanks man

 

[ChaseinBass]

Got a lot done today //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Three minutes with a chisel took care of the excess glue

My children made it home safe & sound

Mounted my amp on top of the box. The top is double layered, the amp has an inch of foam under it, and the inside will be well braced with 1" threaded pipe. I think it will be fine.

The box is now double layered all around. I just have to cut the sub holes, finish coating the inside with resin, and give the port some length.

What is that bent aluminum in second to last pic for ? Looks like your gettin close !

 

[hispls 5,000+ posts]

Mark my words that amp won't last long.

 

[adulbrich 5,000+ posts]

What is that bent aluminum in second to last pic for ? Looks like your gettin close !

It's to hold the wire, so its weight doesn't pull it out of the amp input.

Yep, almost done.

Here's what I need to do, in no particular order. (still quite a lot, actually)

1. Mount mids/highs in doors

2. Treat doors and run wires back to the amp

3. Protect positive wire going through the bed

4. Install alternator with the bracket and run power/ground wires to the battery bank

5. Get recones and build the subs

6. Finish coating the inside of the box with resin and brace it

7. Cut sub holes and add length to the port

8. Mount subs and wire them up

Mark my words that amp won't last long.

Ok

 

[ChaseinBass]

Couldn't you mount amp on floor in front of box ? Or no room ? Can see how close it is to seats in pics . You getting close though .

Sent from my iPhone using Tapatalk

 

---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------

 

Can't see lol

Sent from my iPhone using Tapatalk

 

[adulbrich 5,000+ posts]

Not enough room, because I have the seats all the way back. I don't drive like that one guy with two 15's in a single cab, haha