Soft Dome or Super Tweeter?

[Savackz]

I am trying to figure out whether to get soft dome tweeters or super tweeters. I have an amp that does 60 watts per channel @ 4ohm but I have a problem. I am trying to get a place to put everything without custom fabrication or door pods so I don't know where I should super tweeters if I got them. It's a 1999 4runner. Let me know if you have any ideas!

http://images.gtcarlot.com/pictures/39952605.jpg

Click to read more...

 

[CSCStang]

Everyone is different in tasts, but my choice is always soft dome. Supers are too harsh for me.

 

[Massive spl]

Silk dome tweet

 

[Savackz]

Okay. Which tweeters would you guys recommend then @29hz&Under and @CSCStang ? Nothing too expensive. Talking 40 or 50 bucks tops. Would be opened to used as well.

 

[mylows10 5,000+ posts]

I got a set of ampere tweets Zach You'll need to make some kind of pod tho. Or use spacers for the mids

 

[CSCStang]

Tymphany XT25SC90-04 1" Dual Ring Radiator Tweeter

 

[mylows10 5,000+ posts]

Super tweets tend to be really harsh at times. And normally need half the power to get loud

 

[Savackz]

Super tweets tend to be really harsh at times. And normally need half the power to get loud

PM'd you.

 

[blazian87 10+ year member]

@zcarlson1; From that picture, I can't tell if your vehicle is manual or automatic? It looks like it has both..

 

[Savackz]

@zcarlson1; From that picture, I can't tell if your vehicle is manual or automatic? It looks like it has both..

That is a stock picture. I just got it off of google. Mine is automatic. But that handle closer to the driver side is for 4wd.

 

---------- Post added at 11:39 AM ---------- Previous post was at 11:39 AM ----------

 

Tymphany XT25SC90-04 1" Dual Ring Radiator Tweeter

But where could I mount that?

 

[C1500martin 10+ year member]

Just get a hole saw and drill a hole into your door wherever youd like to mount your tweeter

 

[Jeffdachef 5,000+ posts]

I got a set of ampere tweets Zach You'll need to make some kind of pod tho. Or use spacers for the mids

would these work?

https://www.madisoundspeakerstore.com/lpg/

 

[Bomber Z 10+ year member]

Just picked some soft dome from https://www.madisoundspeakerstore.com/vifa-soft-dome-tweeters/vifa-bc25sc55-04-1-textile-dome-tweeter-truncated/

 

[Savackz]

Just get a hole saw and drill a hole into your door wherever youd like to mount your tweeter

I was trying to avoid cutting open my doors. But I might have to. Just don't feel like I should.

 

[blazian87 10+ year member]

I was trying to avoid cutting open my doors. But I might have to. Just don't feel like I should.

Why don't you just put it on your sail panel? Have you decided what tweeter size you want? If you go with a big tweeter, then you might have to fabricate or drill a hole in your doors. But most 1" tweeters can fit easily in the sail panel. I wouldn't feel comfortable drilling a hole in the doors either.